Luxman PD-191A handleiding
Handleiding
Je bekijkt pagina 12 van 28
10
How to Assemble
Do not turn on the power until assembly is completed.
1. Installation of main body
Install the main body on a rack that is in a position as hori-
zontal as possible.
If the mounting position is inclined, rotate the insulators on
four places of the bottom side to adjust the whole horizontal
balance. When the produce is leveled, keep a gap of ap-
proximately one millimeter between the bottom of the main
unit and each insulator, and then, level the product.
Confirm that there is a gap between the bottom and each
insulator after leveling. This gap allows the insulators to be
more effective and reproduced sound quality to improve.
Counterclockwise for up, and clockwise for down.
2. Platter mounting
Engage the supplied platter mount handles in the platter,
align the center of the platter with the center spindle while
holding the handles, and engage them.
Be sure to use both hands to hold the platter and mount it
while using caution not to apply any unreasonable force to
the center spindle. After mounting the platter, remove the
platter mount handle and keep it in storage.
Exercise extra care to handle the platter because the platter
is heavy.
3. Rubber mat mounting
The face with a hollow in the center is the upper side.
Put the rubber mat on the platter by aligning it with the cen-
ter spindle.
When the rubber mat is mounted, the center part may be
raised.
If the center part is raised, push the part with your finger to
bring it into intimate contact with the platter.
4. Belt wrapping
Firstly, wrap the belt around the turntable. Secondly, wrap
the belt that is wrapped around the turntable around the
pulley.
Rotate the turntable with your hand a few times, and check
to see that the belt is wrapped around the correct position
of the pulley.
Keep a gap of
approx. 1 mm
Platter mount handle
Platter
Rubber belt
Motor pulley
Bekijk gratis de handleiding van Luxman PD-191A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Luxman |
| Model | PD-191A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2492 MB |
