LUPO SuperpanelPRO Dual Color 60 Handleiding (83 Pagina's)

Handleiding

25

1. Press the

5

push button to enter the main MENU.

2. Select MANUAL by pressing the

5

push button.

3. Select the light mode between CCT with the

5

knob and press the

5

push button to conrm selection.

4. See LIGHT MODES.

CCT MODE: Warm and cold white control mode. It allows you to adjust colour temperature (CCT), green/magenta

compensation (GN) and light intensity. This is the default setting.

1. In MANUAL OPTIONS or DMX MODE menu select EFFECT MODE.

2. Select the EFFECT to be activated with rotate the

5

button, conrm the selection by pressing the

5

push button.

3. In current mode, use the «

»

1

o « »

2

button to change the EFFECT in ascending or descending order. THE

EFFECT ON THE DISPLAY IS THE SELECTED EFFECT.

4. Use the knobs

5

and

4

to adjust the effect setting values. See table below.

1. Press the

5

push button to enter the main MENU.

2. Select DMX with the

5

knob and press the

5

push button to conrm selection.

3. Select the light mode between CCT with the

5

knob and press the

5

push button to conrm selection.

4. Select the DMX channel, rotating the

5

knob to change DMX ADDRESS in ascending or descending order between

1 and 512. The number shown on the display

3

is the selected channel to communicate with the control desk.

1. See DMX PROTOCOL MANUAL to DMX channel specication.

1. Press the

5

push button to enter the main MENU.

2. Navigate through the main MENU with the

5

knob and press the

5

push button to conrm selection.

3. Rotate the

5

knob to select BLE, press the

5

push button to conrm selection and to

enable/disable BLE App interface.

- In current mode press the

5

push button to enter the main MENU.

- In the sub-menus press the

5

push button to conrm a selection.

- Rotate the

5

knob to navigate in the main MENU and sub-menus.

- Use the « INTENSITY »

4

knob to adjust the light intensity from 0 to 100%.

- Use the knobs

5

and

6

to adjust the light mode parameters.

- Display

7

.

CONTROL PANEL

MANUAL OPERATION

ATTENTION: The light intensity level is adjustable from 0 - 50% if the

FAN is OFF. The value on the display ashes.

NOTE: The symbol - ! - on the display indicates that

there is no DMX signal.

LIGHT MODES

DMX OPERATION

BLUETOOTH

MODE

CCT

CCT/HUE

5

CT 6500 K to 2800 K

GN/SAT/COLOR

6

« »

1

« »

3

GN -1.00 to +1.00 -

INTENSITY

4

Light Intensity

Bekijk gratis de handleiding van LUPO SuperpanelPRO Dual Color 60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.