LUPO SuperpanelPRO Dual Color 60 Handleiding (83 Pagina's)

Handleiding

21

1. Press the « OK »

2

button to enter the main MENU.

2. Select RESET DEVICE rotating the

2

button, press the

2

push button to conrm the selection.

3. Select YES rotating the

2

button, press the

2

push button to conrm the selection.

4. The device ask for further conrmation, select YES by pressing the press the

2

push button.THE DEVICE

RETURNS TO FACTORY DEFAULT SETTINGS.

RESET DEVICE

DEVICE SETTINGS

FAN: ON

DISPLAY: 1 min

FILTER : Normal speed

LINEARIZATION: Linear

FREQUENCY: 18 KHz

CONTROL

Manual

MODE

CCT

DMX OPERATION

BIT: 8 BIT

DMX SIGNAL LOSS: Settings 1 MIN

RDM ENABLE: OFF

INV - CCT: OFF

FACTORY DEFAULT SETTING

USB PORT

Use USB port for rmware updates.

ATTENTION:

Please keep the original package of the

product in a safe place for warranty reasons.

Update the Firmware

1. Copy the le on an USB Pendrive (FAT32 formatted) in the main root;

2. Switch off the equipment and insert the USB Pendrive;

3. Switch on the equipment;

4. Wait until display backlight ashes (it takes several minutes and red led must toggle for all time long);

5. Switch off the equipment;

6. Extract the Pendrive and switch on the equipment: the rmware is updated.

Package Contents for SuperpanelPRO 30 and UltrapanelPRO 30

AC Power

Cord Cable

Bekijk gratis de handleiding van LUPO SuperpanelPRO Dual Color 60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.