Lumens VC-TR61N handleiding
Handleiding
Je bekijkt pagina 14 van 41
13
Layer 1 Layer 2 Layer 3 Description
IR Select
1/ 2/ 3
Pair the remote controller with the
camera.
Tally Lamp On/ Off Enables the camera's tally lamp.
Tally CMMD Mode Normal/ Link
Set whether the tally lamp is linked
with RS232 commands.
Normal (Not linked): The tally
lamp and mode are set separately.
When the tally lamp is on but
the default mode is off, an
additional command is
required to set the indicator
light mode
When the tally lamp is off,
setting the mode will not
trigger the indicator light
Link:
When the tally lamp is on, the
default mode is a red light
When the tally lamp is off,
setting the mode will turn on
the tally lamp.
Tracking Led Status
On/ Off
When enabled, LED on the front
panel will flash green while the
camera is tracking.
Language
English/ 繁中/ 简中
Initial Position
Last MEM/ 1st Preset
After turning on the camera, you
can select the lens to be returned
to Last MEM or 1st Preset
1st Preset =Preset 0
Motionless Preset
On/ Off
The image will freeze when Preset
is executed. Freeze will be released
after the Preset move is
completed
Privacy Mode
On/ Off
When the camera is turned off via
the remote control or software,
the lens will automatically turn to
the bottom right to ensure the
user’s privacy
Protocol
VISCA Supports VISCA protocol
Bekijk gratis de handleiding van Lumens VC-TR61N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lumens |
| Model | VC-TR61N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6128 MB |
