Lofrans Mini Radio Remote Control handleiding

Niet gecategoriseerd

Lofrans

16 pagina's

PDF beschikbaar

Handleiding

In order to set up the receiver press the learning key button depicted in the

above picture (yellow arrow). The different functional mode can be selected by

pressing this button.

Working Modes:

1. Momentary:

- Keep pressing one button on the remote control to turn ON the

corresponding channel of the receiver.

- Release your nger to turn OFF the receiver’s channel.

7 - SET UP INSTRUCTIONS

CAUTION:

Fit the receiver as far as possible from large metallic objects, electric motors

or high current cables. Please connect the radio receiver’s power supply to

the yacht’s main service battery bank. The battery pack powering the receiver

must be sufciently charged (refer to the battery supplier’s recommendations).

Learning Key

LED indicator

CAUTION: ENSURE THE POLARITIES ARE RESPECTED.

5. Protect the positive supply cable of the receiver by means of a 1A fuse.

6. The receiver already has an integrated protection.

7. To access the outputs of the receiver in order to make the wiring, you must

remove with a cross screwdriver the two screws at the bottom of the box.

8. Connect the 4 outputs of the receiver’s terminal blocks (channels 1, 2, 3

& 4) to the equipment that is to be operated. In the case of a bow thruster or

windlass, see the annexed diagrams for precise instructions.

9. The outputs (channels 1, 2, 3 & 4) are isolated volt free contacts with a load

switching capacity of up to 30V and 10A

10. Follow the set up instructions (cf. chapter 7)

LOFRANS'

Bekijk gratis de handleiding van Lofrans Mini Radio Remote Control, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.