Lofrans LFR200 handleiding
Handleiding
Je bekijkt pagina 4 van 28
LFR 200 & LFR 400
4
4.2 Installing the support bracket
Find the spot most suitable for the support based on the following criteria:
• The support must be positioned so that it can easily be reached by the operator.
• Choose a clean, smooth, at location.
• Check that the back of the panel into which the screws of the support will be inserted is
free from passing cables, tubes, etc..
• Place the support onto the chosen surface.
• Fix the support with the 2 screws provided
After choosing where to position the hand held control,
proceed as follows:
• Position the drilling template provided on the surface
where the socket will be installed.
• Mark the center of each hole and create the hole for
the passage of the socket cable with a milling cutter.
• Remove the template and any splinters around the
hole.
• Fit the seal to the socket base and put the cable
through the hole created.
• Fix the socket in position with the 4 screws provided.
• Before making the electrical connections ensure that
the electrical supply is not connected.
2 6
9.5
UK
UK
Lofrans'
Bekijk gratis de handleiding van Lofrans LFR200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lofrans |
| Model | LFR200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3588 MB |
