Lofrans Gecko handleiding
Handleiding
Je bekijkt pagina 16 van 27
Always remove the handle when not in use.
By disengaging completely the clutch, the anchor will be lowered at high speed. It is recommended always
to check the speed.
5.2 Weighing the anchor
Make sure that the circuit breaker is activated.
If the free fall system is deactivated, make sure that the clutch is well tightened.
Detach the rope from any fixing points or devices.
Press the UP button from the control at your disposal until the anchor reaches its position inside the bow
roller.
Deactivate the circuit breaker.
Secure the rope by attaching it to a strong point or device in order to avoid a potential damage of the windlass
as well as unexpected releases.
If possible, do not carry out the anchor recovery operation by relying only on the onboard batteries. Start
the motor of the boat (or the generator) to obtain the necessary electromotive force.
When the windlass will not be used for long period of time, disconnect all power from the windlass and
cover the windlass in order to protect it from weather conditions.
5.3 Automatic Free Fall System
By default, the automatic free fall operation is in use. Lowering and weighing of the anchor are described in detail in
paragraphs 5.1 and 5.2.
To deactivate the automatic free fall operation, follow the below procedure:
Turn off power to the windlass.
Secure the rope to a strong point or device.
Remove the top screw from the windlass shaft:
16
Lofrans'
Bekijk gratis de handleiding van Lofrans Gecko, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lofrans |
| Model | Gecko |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6721 MB |
