Lofrans Gecko handleiding
Handleiding
Je bekijkt pagina 15 van 27
5. USE OF WINDLASS
5.1 Lowering the anchor
The anchor can be lowered automatically by using the free fall system. If the free fall system is deactivated, the
lowering can be done either electrically or manually.
When the anchor is lowered, the rope must be always fixed to a strong point or device in order to avoid
any potential damage to the anchor windlass and especially the roller.
During the use of the anchor windlass, do not change directly from one direction to the other but wait
until the anchor windlass stops before manipulating the control towards the opposite direction.
A) Automatic lowering with free fall system in use
Detach the rope and anchor from any fixing points or devices.
Keep the DOWN button pressed up to the point in which the anchor can fall freely without encountering any
problems and then release the button. Do not attempt to press the UP button before the windlass stops and
the rope is released.
Once the anchor is lowered and the windlass stops, secure the rope by attaching it to a strong point or device,
the tension must be removed from the roller.
B) Electrical lowering when free fall system is deactivated
The deactivation of the free fall system is described in paragraph 5.3.
Make sure that the clutch is tightened.
Detach the rope and anchor from any fixing points or devices.
Press the DOWN button from the control at your disposal. In this way, the lowering of the anchor and the
unwinding of the rope will be perfectly controllable.
Once the anchor is lowered, secure the rope by attaching it to a strong point or device.
C) Manual lowering when free fall system is deactivated
Make sure the anchor windlass is not powered before carrying out manual interventions.
The deactivation of the free fall system is described in paragraph 5.3.
Detach the rope from any fixing points or devices.
Disengage the clutch gradually using the handle:
Note: It is possible to adjust the descent speed of lowering, through the handle. By turning it clockwise, the
braking speed of the chain will increase (until complete stop), while by turning it counterclockwise, the braking
will be reduced.
Once the anchor is lowered, secure the rope by attaching it to a strong point or device.
15
Lofrans'
Bekijk gratis de handleiding van Lofrans Gecko, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lofrans |
| Model | Gecko |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6721 MB |
