Livington Steam Touch handleiding
Handleiding
Je bekijkt pagina 7 van 24
7
• Only use the accessories recommended by the manufacturer.
• Liquids and vapours should not be directed toward items containing
electrical components, such as oven interiors.
• Do not place on or near gas or electric burners, or in hot ovens.
• Use the appliance only for the purpose intended.
• Do not use on leather, wax-polished furniture or floors, unsealed
hardwood or parquet floors, synthetic fibres, velvet, or other
delicate materials sensitive to water vapour. We recommend testing
the effects on an inconspicuous area beforehand.
• This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards involved.
Children are not allowed to play with the appliance.
• The appliance must not be left unattended while it is connected to
the mains.
• The appliance must be kept away from children when it is switched
on or cooling down.
Complete assembly of the device
1. Connect the device and the hose.
2. When attaching, press the two locking buttons on the hose to ensure
that the hose connection is correctly connected to the device.
Instructions for filling and installing the water tank
1. Remove the water tank from the device (#3).
2. Open the water fill cap on the upper part of the water tank, and fill
with (preferably distilled) water. After adding water, press the water
fill cap firmly into place, and ensure you feel a click (#4).
3. Align the water tank with the markings (see #4a) on the device; an
audible “click” signals that the tank is inserted correctly (#5).
4. As soon as the Livington SteamTouch stops emitting steam, fill the
water container using the filling cup
5. to continue cleaning, or turn off the device and end the cleaning
process. You also have the option to fill the tank of the Livington
SteamTouch while it is turned on, as it has an automatic water function
that stops the steaming process as soon as the tank is empty.
Instructions for attaching and removing accessories (glove and
brush, see Figure #6):
Hose: One end connects to the main device, the other end is used to
attach the heat-resistant glove or accessory handle.
ATTENTION: The glove is connected directly to the steam outlet
connection, and CAN NOT be placed on the accessory handle.
Accessory handle: First insert this into the steam outlet of the hose,
then turn it 90 degrees. This can also be optionally used without a
brush.
Brush: Using the slide-on rail, attach the brush to the accessory handle
by applying slight pressure in an anti-clockwise direction, then fixing it
in place with a twisting movement. (See Figure #6). To remove, turn it
clockwise and pull it back off the thread of the steam outlet. (#9).
ATTENTION: Never use the round brush on
scratch-sensitive surfaces.
Heat-resistant glove: Simply attach to the hose‘s steam outlet
connection. Attach the required cleaning pad to the inside of the glove
using the Velcro fasteners (either the reusable microfibre pad or the
disposable hygiene pad for special cleaning areas).
Note: Never remove or attach accessories while the device is in use.
Using the carry strap (#7):
Carrying strap: For attaching the strap to the device, see #7. Using
the carrying strap allows you to work hands-free.
Getting started:
• As soon as the device is connected to the mains, the power indicator
begins to glow red, indicating standby mode.
• Press the On/Off switch and the steam heater indicator will flash
blue for 15 seconds; steam will then be released. After 15 seconds,
the steam heating indicator will continuously light up blue.
• Please note that the device may drip from the time it is started up
until the target temperature is reached. This is not a malfunction, but
a normal part of the heating-up process.
• Pressing the On/Off switch again will turn the device off. The steam
indicator turns off and the heating process stops, although the red
power indicator remains lit red.
Cleaning and maintenance:
Empty the water tank: After use, remove the water tank. Open the
lid located at the bottom of the water tank over a sink and drain the
remaining water. See #11. Unplug the power plug, reattach the water
tank to the device, and correctly stow the power cord.
Cleaning the glove: Remove the microfibre pad from the underside of
the glove and wash it. Remove the disposable hygiene pad and throw
it away. Clean the glove under running water if necessary. Caution:
Hand wash only! We recommend that you store the steam cleaner in its
original packaging when not in use.
Technical Data: 220-240V~ 50/60Hz
Power: 1200 W
Water tank capacity: 200 ml
Material composition: Microfiber pad: 93% Polyester, 7% Nylon
Glove: 100% polyester
Disposable hygiene pad: 100% polyester
Washing instructions:
Frequently asked questions (FAQs): If issues arise, users can take
the following troubleshooting actions:
Problem Possible Cause Remedy
Reduced or no
steam.
The water tank
is not attached
or is not inserted
correctly.
Fill the water tank and
insert it correctly.
The steam nozzle
may be blocked.
Clean the steam nozzle.
M37291_M37290_Livington_SteamTouch_Manual_20240911_TC.indd 7M37291_M37290_Livington_SteamTouch_Manual_20240911_TC.indd 7 23.09.24 09:0123.09.24 09:01
Bekijk gratis de handleiding van Livington Steam Touch, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livington |
| Model | Steam Touch |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5631 MB |
