Livarno Lux IAN 424478 handleiding
Handleiding
Je bekijkt pagina 5 van 41
8 9
GB/IEGB/IE
1
WARNING!
Risk of injury!
Wear gloves!
Do not touch leaked batteries
with bare hands! There is a
risk of injury!
- Leaked or damaged batteries may cause
chemical burns if they come into contact
with skin. Do not touch leaked batteries
with bare hands; therefore ensure that
you wear appropriate protective gloves
in this case!
- Only use type AA/LR6 batteries from the
same manufacturer.
- Insert the batteries into the designated
battery compartment with the correct po-
larity.
- Do not use combinations of old and new
batteries or rechargeable batteries.
- Store batteries in a dry and cool, not
damp, place.
- Never throw batteries into fire.
- Do not short-circuit batteries.
- Disposable batteries also lose part of
their energy during storage.
- Remove the batteries if the device is not in use.
- Discharged batteries must be immediately
removed in order to avoid battery leak-
age and thus damage to the device.
- Empty batteries or used rechargeable
batters must be disposed of properly.
- Store disposable batteries separately
from discharged batteries, in order to
avoid mix-ups.
- Do not drop batteries or expose them to
strong mechanical shocks.
2
CAUTION!
Danger of overheating!
Remove packaging prior to use.
7. Start-up
1. Remove all packaging materials.
2. Check whether all parts are available
and undamaged.
If this is not the case, notify the specified
service address.
Remove safety strip for batteries
(Fig. B)
The alkaline batteries
2 are already inserted
in the delivery state and provided with a safe-
ty strip
4a which must be removed before the
first start-up.
- Pull out the safety strip
4a as shown in
Fig. B on the underside of the product
1 .
The product
1 is now ready to use.
Setting up the product
Set up the product in an appropriate place.
NOTE!
- The surface should be level so that the
product cannot fall over. The place should
have sufficient free space around the
product.
- Place a protective blanket underneath
the product. Sensitive surfaces could be
scratched by the product.
8. Usage
On-/off switching and activating
moving parts, music and timer (Fig. C)
With the switch
6 on the back of the product
you can switch the following modes:
ON1: Light + Motion + Timer
OFF: Off
ON2: Light + Motion + Music
Timer function
The product is equipped with a timer function.
When the “ON1” mode is selected, the tim-
er function will turn on. If the timer function is
switched on, the product switches off automat-
ically after 6 hours. After another 18 hours,
the product will automatically switch back on.
As long as the switch
6 is left in the “ON1”
position, this daily cycle is repeated.
NOTE!
- The product has 8 Christmas melodies.
When the “ON2” mode is selected, these
8 Christmas melodies will be played one
after another in a continuous loop.
- No selection of Christmas melodies can
be made.
- The speaker
7 (Fig. B) is located on the
underside of the product. Therefore, do
not place the product on a surface that is
too soft. Otherwise the sound will be too
muffled.
NOTE!
The timer function works without the music.
This means that after 18 hours the functions
light and movement of parts will be activated,
but the music will not start.
NOTE!
Risk of material damage
- Make sure that moving parts 3 (Fig. A)
of the product are not restricted or ob-
structed in their radius of movement. There
is a risk of material damage.
- Remove any objects located in the move-
ment range before start-up.
9. Inserting/replacing bat-
teries (Fig. B)
When the light of the LEDs becomes dimmer,
the music quieter or the moving parts slower,
the alkaline batteries
2 need to be replaced.
For this, proceed as follows:
1. Switch off the product.
2. Carefully unlock the battery compartment
cover
4 from the battery compartment
5 by pressing on the arrow and sliding
the battery compartment cover
4 in the
direction of the arrow.
3. Carefully flip open the battery compart-
ment cover
4 .
NOTE!
Be careful not to lose the battery compartment
cover, as it has the nameplate on it. The name-
plate is an important part of the product.
4. Remove any depleted batteries from the
battery compartment
5 .
5. Insert 3 new batteries of type AA/LR6
into the battery compartment
5 with the
correct polarity.
6. Afterwards, close the battery compart-
ment
5 .
The product is now ready for operation again.
10. Cleaning and care instruc-
tions
2
CAUTION!
Risk of injury!
Before cleaning, you must
remove the batteries from the
battery compartment. There is a risk
of electric shock!
- only clean with a feather duster
- if necessary, blow away impurities
- do not use any strong detergents and/or
chemicals
- do not immerse in water
- store in a cool, dry place and protected
from UV light
11. Conformity declaration
This device complies with the fun-
damental requirements and other
relevant regulations of the Europe-
an Electromagnetic Compatibility Directive
2014/30/EU and the RoHS Directive
2011/65/EU. The complete original con-
formity declaration is available from the im-
porter.
12. Disposal
Disposal of the packaging
The packaging and instruc-
tions are made of environmen-
tally friendly materials that you
can dispose of at local recy-
cling points.
Disposal of the product
The product may not be disposed of
with normal household waste. For in-
formation on disposal options for the
product, please contact your local
council/municipality or your Lidl shop.
Disposal of the battery / rechargea-
ble battery
- Defective or used rechargeable bat-
teries have to be recycled in accord-
ance with Directive 2006/66/EC
and ist amendments.
- Batteries and disposable batteries are not
permitted to be disposed of with house-
hold waste. They contain harmful heavy
metals. Marking: Pb (= lead), Hg (= mer-
cury), Cd (= cadmium). You are legally
obligated to return used batteries and re-
chargeable batteries. After use, you can
either return batteries to our point of sale
or in the direct vicinity (e.g. with a retail-
er or in municipal collection centres) free
of charge. Batteries and rechargeable
Bekijk gratis de handleiding van Livarno Lux IAN 424478, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 424478 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8316 MB |
