Livarno Lux IAN 410820 handleiding
Handleiding
Je bekijkt pagina 16 van 111
16 GB/IE
Safety
Safety
Safety information
Damage due to failure to comply with these operating
instructions will invalidate the guarantee! We assume
no liability for consequential damage! We assume
no liability for material damage or personal injury
due to improper handling or failure to comply with
the safety instructions!
DANGER TO
LIFE AND RISK OF ACCIDENTS
FOR INFANTS AND CHILDREN!
Never leave children unsupervised with the
packaging materials. The packaging material
poses a suffocation hazard. Children frequently
underestimate the dangers.
Do not leave the light or packaging material ly-
ing unattended. Plastic film or bags, Styrofoam
etc. can turn into dangerous toys for children.
Please always keep the product out of the reach
of children.
This device may be used by children aged
8 years and up, as well as by persons with re-
duced physical, sensory or mental capacities,
or lacking experience and/or knowledge, so
long as they are supervised or instructed in
the safe use of the device and understand the
associated risks. Do not allow children to play
with the device. Cleaning and user maintenance
must not be performed by children without
supervision.
Avoid the risk of fatal injury
from electric shock
Ensure that a qualified electrician, or a person
trained to carry out electrical installations, per-
forms the electrical installation.
Always check the light, power supply, and mains
cable for damage before plugging it in. Never
use the light if it shows any signs of damage.
A damaged mains cable indicates a life-threat-
ening danger due to electric shock. In the event
of damage, repairs or other problems with the
light please contact the service centre or a
qualified electrician.
Prior to installation, remove the fuse or switch
off the circuit breaker (0 setting) in the fuse box.
Prior to installation, verify that the mains voltage
on site corresponds with the operating voltage
required for the light (see “Technical data“).
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
Do not install the light on a wet or conductive
substrate!
Prevent fire and
injury hazards
Check the light for damage immediately after
unpacking. In this case, contact the service centre
for a replacement.
CAUTION! RISK OF BURNS
DUE TO HOT SURFACES!
Ensure that the light has been switched off and
has cooled before touching it, to avoid burn in-
juries. Lamps develop a lot of heat in the area
of the lamp head.
The light source in this product is not replaceable.
The entire light must be replaced if the light
source reaches the end of its service life.
This lamp is not suitable for external
dimmer and electronic switches.
Do not look directly into the light source
(light bulb, LED etc.).
Do not use optical instruments to look at the
light source (e.g. magnifying glass).
Safe working
Mount the light so that it is protected from
moisture and dirt.
Carefully prepare the installation and allow
sufficient time. Organise all parts and any
Safety/Preparation
Bekijk gratis de handleiding van Livarno Lux IAN 410820, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 410820 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10961 MB |
