Livarno Lux IAN 390508 handleiding
Handleiding
Je bekijkt pagina 5 van 43
8 9
GB/IEGB/IE
7 Power supply cable
8 Plug
8a Sealing ring
9 Output socket
10 Union nut
11 Timer button
12 LED strand
Assembly
Place the product only on a flat, level surface. Pay
attention to the fact that the occupied area requires
approx. 4 x 4 m of free space.
NOTE!
Leave the LED strands
12 coiled for the time being to
simplify assembly.
1
WARNING!
Risk of injury!
The LED strands
12 must not be
operated in the wound-up state.
Danger of overheating!
For safety reasons, keep the product switched off
during all steps of the Assembly.
1. Insert the ground spike
5 as deep as possible
into your intended spot in the ground.
2
CAUTION!
Risk of injury!
- The ground must be sufficiently firm and stable to
hold the ground spike
5 .
- If the ground is too firm to press the ground spike
5 into the ground, loosen the ground slightly.
- Wear suitable protective gloves when inserting
the ground spike
5 .
2
CAUTION!
Risk of damage to property!
- Do not insert the ground spike
5 into the ground
if the ground is frozen or if you feel a strong resis-
tance. You could damage the ground spike
5 !
- Do not use a hammer or other tools when insert-
ing the ground spike
5 . You could damage the
ground spike
5 !
2. Place the LED star
1a on the bracket 1b on the
top section
1 , see Fig. B.
NOTE!
The LED star
1a is connected to the top section 1
by the wiring.
3. As shown in Fig. B, connect the pole
1c of the
top section and the other poles
3 using the con-
nectors
4 .
4. Carefully unwind the LED strands
12.
NOTE!
Make sure that the LED strands 12 do not get tangled
in each other when unwinding.
5. Carefully insert the pole assembled in step 3.
onto the ground spike
5 , see Fig. B.
6. Check all plug connections of the product for se-
cure and tight fit.
7. Attach the pegs
6 to the end of the LED strands
12, see Fig. E.
8. Attach each peg
6 together with the LED strand
12 to the desired position on the ground, see Fig.
E/F.
NOTE!
Risk of damage to property!
Do not tension the LED strands 12 too tightly. The
product may become damaged.
Start-up of the power supply unit
1
WARNING!
Risk of injury!
There is a risk of injury from electric
shock!
The product may only be operated
with the supplied power supply unit
2 !
The product may only be operated with the supplied
power supply unit
2 with the model designation
MLS-D24V1.5WG3TK-IP44.
The product must be disposed of if the power supply
unit
2 is defective.
1. Insert the plug
8 according to the polarity into the
output socket
9 see Fig. C.
NOTE!
For this, please pay attention to the recess and polar-
ity
in the outlet socket 9 .
1
WARNING!
Risk of injury!
There is a risk of electric shock!
The product must not be used without the
sealing ring
8a properly attached to the
plug
8 , see Fig. C!
2. Screw the union nut
10 clockwise onto the output
socket
9 , see Fig. C.
NOTE!
- Make sure that the union nut
10 does not tilt and
that it is firmly tightened. This is the only way that
weather-proofness in accordance with IP44 can
be guaranteed.
2
CAUTION!
Risk of damage to property!
- Make sure that the power supply cable
7 is nev-
er crushed, kinked or damaged by sharp edges.
- Make sure that the power supply cable
7 hangs
loosely and is not too taut. Otherwise there is a
risk of cable breakage.
2
CAUTION!
Risk of injury!
- To minimize the risk of tripping posed by a loose-
ly laid power supply cable
7 , if possible, wrap
the power supply cable
7 one to several times
around the pole of the product before connecting
the connected power supply unit
2 to a wall out-
let, seeFig. F.
Product switch on/off
To switch on the product, plug the power supply unit
2 , which is properly connected to the power supply
cable
7 , into an easily accessible and properly in-
stalled wall outlet. The product is now switched on
and illuminated.
To switch the product off, remove the power sup-
ply unit
2 from the wall outlet. The product is now
switched off.
Timer function (6-hour timer)
The product is fitted with a timer function. If you press
the timer button
11 on the power supply unit 2 , the
timer function switches ON, see Fig. D. When the
timer function is activated, the timer button
11 lights
up green.
When the timer function is activated, the product
switches OFF automatically after 6 hours. After an-
other 18 hours, the product will automatically switch
back ON. This daily rhythm repeats as long as the
timer function remains activated.
By pressing the timer button
11 on the power supply
unit
2 again, you switch the timer function OFF. The
green LED in the timer button
11 goes out.
Disassembly
To disassemble the product, unplug the power sup-
ply unit
2 from the wall outlet and then follow the
steps listed under Assembly in reverse order.
7. Cleaning and care instructions
1
WARNING!
Risk of injury!
Before cleaning, you must unplug
the power supply unit
2 from the
wall outlet. There is a risk of electric
shock!
- only clean with a dry cloth
- do not use any strong detergents and/or chemi-
cals
- do not immerse in water
- store in a cool, dry place and protected from UV
light
8. Conformity declaration
This device complies with the fundamental
requirements and other relevant regula-
tions of the European Electromagnetic
Compatibility Directive 2014/30/EU and the RoHS
Directive 2011/65/EU. The complete original con-
formity declaration is available from the importer.
9. Disposal
Disposal of the packaging
05
The packaging and operating
instructions are made of 100 %
environmentally friendly materi-
als, which you may dispose of at
local recycling centres.
Disposal of the product
The product may not be disposed of with nor-
mal household waste. For information on dis-
posal options for the product, please contact
your local council/municipality or your Lidl shop.
10. Warranty
Dear customer, the warranty on this product is 3
Bekijk gratis de handleiding van Livarno Lux IAN 390508, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 390508 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8971 MB |
