Livarno Lux IAN 378852 handleiding
Handleiding
Je bekijkt pagina 8 van 30
10
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety
information carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Scope of delivery (fig. A)
1 x cruciform base (1) with protective cap (1a)
1 x gas spring (2)
1 x gas spring cover, 3-part (3)
1 x seat plate (4)
1 x backrest (5)
1 x seat (6)
1 x armrest, right, (7)
1 x armrest, left (8)
5 x castor (9)
4 x screw, short (10)
8 x screw, long (11)
8 x cover cap (12)
1 x Allen key (13)
1 x assembly instructions
Technical data
Suitable only for carpeted floors
110
Maximum load: 110 kg
Date of manufacture (month/year):
09/2021
Intended use
The product is not intended for commercial use.
The product is designed for private use indoors.
Safety instructions
Danger to life!
• Never leave children unsupervised with the
packaging material. Risk of suffocation.
Risk of injury!
• Before using the product check for correct
stability.
• Stand the product on an even surface.
• The product may only be used under adult
supervision and not as a toy.
• The product is not for climbing on or playing
with! Make sure that people, especially chil-
dren, do not pull themselves up on the product
or lean against it. The product may tip over.
• Check the product for damage or wear before
each use. The product may be used only
when in good working order and condition!
• Make sure that the product is assembled cor-
rectly and in accordance with these assembly
instructions. Incorrect assembly can lead to
injuries and may also compromise safety and
function.
• The gas spring may only be replaced or
repaired by trained and qualified personnel.
• Never stand on the product.
Assembly
1. Insert the castors (9) into each castor guide in
the cruciform base (1) (fig. B).
2. First insert the gas spring (2) into the cruciform
base (1) with protective cap (1a) and then
place the gas spring cover (3) on the gas
spring (2) (fig. B).
3. Screw the seat plate (4) on the bottom of the
seat (6) tight using the short screws (10) (fig. C).
Note: Be sure to align the seat plate correctly.
4. Use the long screws (11) to screw the right
armrest (7) and the left armrest (8) onto the
seat (6) (fig. D).
Place the cover caps (12) on the heads of the
screws.
Note: Turn the screws loosely at first and tighten
them when the product is completely assembled.
5. Insert the gas spring (2) in the seat plate (4)
(fig. D). Apply pressure to the assembled
product in order to firmly interconnect the
component parts.
6. Screw the backrest (5) to the seat (6) with the
screws (11) and use the cover caps (12) (fig. E).
GB/IE
Bekijk gratis de handleiding van Livarno Lux IAN 378852, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 378852 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2570 MB |
