Livarno Lux IAN 365267 handleiding
Handleiding
Je bekijkt pagina 20 van 91
20 GB/IE
Initial use / Resetting the light / Pairing the LED mood light with ...
Initial use without the mains adapter
(battery power):
Note: To operate the light without the mains
adapter
3
, the integrated battery must be charged.
Remove the plug-in connector
4
on the mains
cable
2
from the socket
5
in order to use
the light without a mains connection.
Set up the light in the desired location.
Switch the light on or off using the ON / OFF
button
6
.
Charging the
rechargeable battery
Connect the plug-in connector
4
on the mains
cable
2
with the socket
5
(see Fig.).
Plug the mains adapter
3
into a mains socket
that has been professionally installed.
Note: The battery will also be charged when
the light is in operation.
Resetting the light
The light must be in learning mode to pair the light
with the app. This is indicated by the light flashing
regularly.
If the light does not automatically start flashing, re-
turn the light to learning mode. To activate learning
mode, switch the light on and off as follows:
‒ switch on
‒ 1 sec. off
– 1 sec. on
‒ 1 sec. off
– 1 sec. on
‒ 1 sec. off
– 1 sec. on
The light should now be flashing regularly in
learning mode.
Note: This procedure only resets the product to
offline mode and starts the learning mode.
If you want to remove all product and cloud data,
please refer to the section Disconnecting the remote
control and smart phone. Follow the instructions and
select “Disconnect and delete data” under “Remove
device”.
Pairing the LED mood light
with the smartphone
Please consult the “Lidl Home” app for DETAILS of
our privacy policy.
1. Open the “Lidl Home“ app.
2. Go to the “Home“ tab
.
Select “+“ (add device).
3. Choose the category “Lighting” and the de-
sired lighting type.
4. Select the gateway (only available when using
multiple gateways).
5. Now click “OK“.
6. Go to “Confirm“ whilst the LED mood light is
flashing.
7. Connect to the device.
8. Go to
.
9. Go to “Device name“. Enter a name and
confirm.
10. Choose a room in order to specify the position
of the light. The selected room will now be
greyed out.
11. Click “Finish“ to confirm.
12. The learning process is complete.
13. Click
<
to return to the home screen.
Disconnecting the smartphone
1. Open the “Lidl Home“ app.
2. Go to the “Home“ tab
.
3. Choose one of the categories:
– ZigBee gateway
– LED mood light
4. Go to
.
5. Go to “Disconnect”.
6. Click “Confirm“ to proceed. To remove all
product data from the cloud, select “Disconnect
and delete data”.
7. Confirm
App functions / Maintenance and cleaning / Disposal
Bekijk gratis de handleiding van Livarno Lux IAN 365267, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 365267 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8246 MB |
