Livarno Lux IAN 365098 handleiding
Handleiding
Je bekijkt pagina 23 van 156
23 GB/IE
Before installation
Important: The electrical connection must be established by a qualified
electrician or a person trained to perform electrical installations. This per-
son must be familiar with the properties of the product and the connection
regulations.
Before installation ensure that the circuit, to which the product will be
connected, is not energised. To do so, remove the fuse or switch off
the circuit breaker in the fuse box (0 position).
Use the voltage tester to verify the de-energised status.
The included mounting material is suitable for ordinary solid concrete
or masonry construction. Check which mounting material is suitable
for your chosen mounting surface. If necessary, seek expert advice.
Before use
Note: Remove all packaging materials from the product.
Installation
Make sure you will not be drilling into electrical, gas or water lines
inside the wall. Use a power drill to drill the holes into the brick wall.
Always observe all safety instructions for the power drill in the man-
ual for the power drill. Death or injury due to electric shock may
otherwise result.
When selecting the mounting location, pay attention to the following:
Make sure that the spotlight
1
illuminates the desired area. You
can move the spotlight
1
vertically.
Bekijk gratis de handleiding van Livarno Lux IAN 365098, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 365098 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8668 MB |
