Livarno Lux IAN 354380 handleiding
Handleiding
Je bekijkt pagina 10 van 81
10 GB/CY
5. Take out the ground stake
4
from the pole
3
and insert
the ground stake
4
into the pole
3
with the tip facing
downwards (see Fig. C).
6. Your product is ready for use (see Fig. D).
Setting up the product
Insert the assembled product far enough into the ground
(lawn, flower bed) for it to be stable.
Make sure you keep proper footing and balance at all
times. Do not use any force when assembling or setting-up
the product, e.g. hammer blows. This will damage the
product. In order to achieve the best result, set the product
up in a place where the solar cell will get direct sunlight
for as long as possible.
Make sure that the solar cell is not influenced by any
other source of light such as yard or street lighting as
otherwise the light will not come on in twilight.
The light automatically switches on in twilight conditions and
off again when normal outdoor lighting conditions return.
Replacing the rechargeable battery
The rechargeable battery should be replaced every
12 months to ensure optimum performance.
1. Separate the solar cell housing
1
from the lamp shade
2
by moving it anti-clockwise (see Fig. A). Switch off the
light with the ON- / OFF-switch
5
.
2. Loosen the fastening screws
6
by using a small cross
head screwdriver and then lever out the battery compart-
ment lid
7
of the solar cell housing
1
with the help of a
slot screwdriver (see Fig. B).
3. Take care not to damage the cables and cable connections
(see Fig. B).
4. Exchange the old rechargeable battery
8
to a new one.
Take care about the correct polarity, when inserting the
new rechargeable battery. The polarity is indicated in the
battery compartment. The new rechargeable battery has
to have the same technical data like the old one (see
chapter “Technical data”).
5. Now again fasten the battery compartment lid
7
, fasten
the fastening screws
6
by using a small cross head screw-
driver. Slide the ON / OFF switch
5
to the position ON.
6. Connect the solar cell housing
1
again to the lamp
shade
2
and then connect every part of the product to
each other (see Fig. C).
Bekijk gratis de handleiding van Livarno Lux IAN 354380, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 354380 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5227 MB |
