Livarno Lux IAN 354373 handleiding
Handleiding
Je bekijkt pagina 11 van 50
11 GB/IE/NI
illuminant facing down (see
Fig. B).
Installing the
fairy lights
Push the ground spike
3
far
enough into the ground (lawn,
flower bed) so it is firmly posi-
tioned upright in the ground.
Make sure it is firmly positioned.
Do not use any force when as-
sembling or setting up the prod-
uct, e.g. hammer blows. This
will damage the product. For
optimal results, hang the solar
fairy lights in a location where
the solar cell is exposed to sun-
light for the longest possible
amount of time.
Make sure the solar cell is not
impacted by other light sources,
e.g. yard- or street lighting, or
the light will not switch on at
twilight. In low light the light
will automatically switch on,
and automatically switch off in
normal ambient light.
Switching the fairy
lights on / off
Push the AUTO / OFF button
2
to switch the fairy lights
8
on.
The fairy lights
8
will auto-
matically switch on or off at
twilight.
Push the AUTO / OFF button
2
again to switch the fairy lights
8
off.
Replacing the
rechargeable
battery
Note: For optimal performance,
the rechargeable battery should be
replaced every 12 months.
Remove the solar cell housing
1
from the cover
5
.
Press the AUTO / OFF button
2
to switch the fairy lights
8
off.
Remove the fixing screws
7
using a small cross-tip screw-
driver. Then open the battery
cover on the solar cell housing
1
using a flat-head screw-
driver.
Replace the old battery with a
new one; be sure not to dam-
age the cables. Be sure to in-
sert the batteries in the correct
Bekijk gratis de handleiding van Livarno Lux IAN 354373, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 354373 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3337 MB |
