Livarno Lux IAN 321932 handleiding
Handleiding
Je bekijkt pagina 14 van 47
14 GB/IE
Installing the... / Maintenance and cleaning / Disposal / Warranty and serviceSafety / Initial use
Make sure before use that the available supply
voltage corresponds to the required operating
voltage of the item (see ″Technical Data″).
Never allow the live power leads and contacts
to come into contact with water or other liquids.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
Do not install the lamp on damp or conductive
surfaces.
This LED strip must not be connected electrically
with other LED strips.
Protect the product from sharp edges, mechani-
cal loads and hot surfaces.
Do not secure with sharp staples or nails.
Always unplug the mains plug from the socket
before assembly, disassembly or cleaning.
Never catch hold of the mains plug or the LED
strip with wet hands.
Only use the individual parts supplied, other-
wise all warranty claims will become invalid.
Do not operate the LED strip in its packaging.
Otherwise there is the risk of overheating.
Do not operate the LED strip if it is covered with
objects or wound around a wheel.
Do not use the LED strip if it is covered with
objects or is inlaid into a surface.
Lay the product out completely before you
connect it to the power supply.
The lamp‘s illuminant is not replaceable. The
entire lamp needs to be replaced if the illuminant
reaches the end of its service life.
Do not open or cut open/slit open the light
strip.
Avoid excessive bending of the LED strip.
Prevent fire and injury
hazards
This product does not contain any parts that
can be serviced by the user. The LEDs cannot
be replaced.
If the LEDs cease to function at the end of their
operational life, the entire item must be replaced.
The installed LEDs are not suitable
for dimmers or electronic switches.
Do not look into the LED from a close distance
during operation.
Do not look at the LED with an optical instrument
(e.g. magnifier).
Safe working
Install the light so that it is protected from dirt
and excessive heating.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Never use the LED strip if you are having diffi-
culty concentrating or do not feel well.
Before use, familiarise yourself with all the in-
structions and diagrams in these instructions, as
well as with the LED strip itself.
To completely disconnect the LED strip from
the power supply, the mains adapter must be
removed from the mains socket.
Initial use
Remove all packaging materials before first use.
The chain of lights should not be connected to
the mains supply while it is still in its packaging.
Trimming the LED tape
The LED strip can be trimmed.
DANGER TO LIFE BY
ELECTRIC SHOCK!
Disconnect the lights from the power supply before
performing any work on the LED strip
2
. Unplug
the mains adapter
1
from the socket to do so.
Choose the desired LED strip length.
Note: Ensure that you cut the LED strip
2
at
the right place. It is only possible to cut the LED
strip
2
at the points marked with a scissors
symbol! The cutting point lies exactly between
the plus and minus pole and is marked with a
black line (see Fig. B).
Shorten the LED strip
2
using a pair of scissors.
Be sure to cover the open end of the LED strip
2
with the adhesive strip
8
before use (see Fig. C).
Bekijk gratis de handleiding van Livarno Lux IAN 321932, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 321932 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4353 MB |
