Livarno Lux IAN 279822 handleiding
Handleiding
Je bekijkt pagina 8 van 12
8 GB/IE/NI
Avoid the danger of death
from electric shock!
Verify the existing mains voltage corresponds
to the required voltage of the device (220–
240 V∼) before using it.
Always check the appliance and the mains
supply for damage before connecting it to
the mains. A damaged device represents the
danger of death from electric shock.
Do not use the device if you detect any dam-
age.
In the event of damage, repairs or other
problems with the device, please consult an
electrician.
Never open any of the components of the
electrical equipment or insert any objects
into the same components. This will pose a
risk of fatal injury from electric shock.
Never allow the appliance to come into
contact with water or other liquids.
Protect the power cord from sharp edges,
mechanical strain and hot surfaces.
Never use the device in immediate vicinity of
a bath, shower or swimming pool.
Do not look directly into the light or its reflec-
tion. Do not aim the light directly at people.
This could produce glare, leading to accidents.
If direct or reflected light strikes your eyes,
close them and immediately move your head
out of the light.
Only operate the light with the included LED
driver (GY-CC12V300mA-L-003). Please
note that any damage caused by the use of
a different LED driver is excluded from the
warranty.
Never touch the mains plug
13
with damp
or wet hands.
If the light will not be used for extended
periods (e.g. during holidays), unplug the
mains plug
13
from the socket.
The bulb becomes hot during operation.
Allow the light and bulb to cool before you
touch them.
The LEDs cannot be replaced.
This product is only suitable to be powered
with the included LED driver
(GY-CC12V300mA-L-003).
Please note, the LED driver will continue to
draw a small amount of electricity even with-
out the light being operated so long as the
mains plug is plugged into the socket. Unplug
from the socket to switch the device off com-
pletely.
The illuminant is not replaceable.
If the illuminant fails at the end of its life, the
entire light must be replaced.
Bekijk gratis de handleiding van Livarno Lux IAN 279822, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 279822 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 660 MB |
