Livarno Lux HG06497 handleiding
Handleiding
Je bekijkt pagina 7 van 36
7 GB/CY
Use
Insert the plug with union nut
2
on end of the
light chain
3
into the socket of the mains
adapter
1
.
Turn the union nut clockwise to fix the connec-
tion. Pay attention to the sealing ring must be
properly installed.
Insert the mains adapter
1
into the mains
socket. The product is ready to use.
Please note that the power adapter continues
to draw a small amount of power even if the
product is turned off as long as the power
adapter is plugged into a power outlet. To
switch the product off completely, unplug the
power adapter from the socket.
You can fix the product on the desired surface
and fix the product by attaching it with the help
of mounting material such as cable ties, glue
(mounting material is not included).
The weight of the light chain must be observed
before hanging up.
Light function
The function and timer button
4
can be select
below functions:
1 x push of the button:
The product lights up with “Snowfall effect”.
2 x push of the button:
The product lights up continuously (”Steady on”).
3 x push of the button:
The product is switched off.
Note: The timer function can be activated in both
lighting functions (“Snowfall effect”, “Steady on”).
Timer function
To switch on the timer function, press the func-
tion and timer button
4
and hold for 3 sec.
after the product is connected to the socket of
power supply. The function and timer button
4
will light up green when the timer function is acti-
vated.
The product lights glow permanently for
6 hours and will be followed by a subsequent
pause of 18 hours. Afterwards, the product
will light up again at its designated turn on
time for 6 hours followed by a subsequent
pause of 18 hours.
To switch off the timer function, press the func-
tion and timer button
4
and hold for 3 sec.
again and the light of the function and timer
button
4
will be turned off.
To switch the product off completely, unplug
the mains adapter
1
from the socket.
Note: The timer function can be activated
in both lighting functions (“Snowfall effect”,
“Steady on”).
Cleaning and care
DANGER OF ELECTRIC
SHOCK! First pull the mains adapter out of the
mains socket.
DANGER OF ELECTRIC
SHOCK! For reasons of electrical safety the pro-
duct must never be cleaned with water or other
liquids or immersed in water.
Do not use any solvents, petrol or similar items.
This would damage the product.
Only a dry, lint-free cloth should be used for
cleaning.
Easy to clean for heavy soiling, with a slightly
damp cloth.
After cleaning, plug the mains adapter
1
b
ack
into the socket.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and fibre-
board/80–98: composite materials.
Bekijk gratis de handleiding van Livarno Lux HG06497, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | HG06497 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3468 MB |
