Livarno Lux HG06103 handleiding
Handleiding
Je bekijkt pagina 9 van 43
9 GB/IE
Place the product on a solid, level surface.
This product is not a toy and should only be
used under adult supervision.
Check the product for damage or wear before
every use.
Never use the product close to an open flame.
We recommend that two people assemble the
p
roduct to avoid injury or damage to the product.
Do not let go of the handle
2
after you have
released it from the fixing post
4
. Only release
it when the screen is securely in the cassette
1
.
Carelessly letting go of the handle
2
can
cause damage and/or injury.
The product can be damaged if used in frost.
No maintenance work necessary.
Wind resistance class 1 = Beaufort wind scale
4 = 20‒27 Km / h (branches move, loose paper
is lifted from the ground)
Assembly
Use a cross-head screwdriver to attach the wall
brackets
5
to the product using the screws
6
(see Fig. A).
Choose a suitable installation area on a wall
and mark four holes for the brackets
5
.
Make 5 cm deep holes at the marked points
using a drill (see Fig. B).
Important: Make sure that the anchor bolts
are suitable for the material used. If they are
not, enquire about suitable anchor bolts at a
hardware store.
Attach the product to the wall by driving the
anchor bolts
7
into the drilled holes using a
hammer. Securely tighten the anchor bolts
7
using a spanner.
Choose a suitable installation area on the floor
and mark four holes for the fixing post
4
. Whe
n
choosing the location, make sure that the posi-
tions of the cassette
1
and the fixing post
4
are aligned horizontally. The fixing post
4
can
b
e installed at a maximum of 350 cm away from
the cassette
1
. Make 5 cm deep holes at the
marked points using a drill (Ø 8 mm) (see Fig. C).
Secure the fixing post
4
by driving the anchor
bolts
7
into the drilled holes using a hammer.
Securely tighten the anchor bolts
7
using a
spanner.
Opening the screen (see Fig. D)
Hold the handle
2
and pull it to the fixing
post
4
.
Insert the catch
3
(under the handle
2
) into
the recess provided on the fixing post
4
.
Insert it into the catch
8
on the fixing post.
Closing the screen (see Fig. D)
Hold the handle
2
, pull it back, and lift it.
Follow the groove to disconnect the handle
2
and the fixing post
4
.
Hold the handle
2
and move it back to the
cassette
1
. Move the handle
2
slowly and
horizontally. The fabric will retract into the cas-
sette
1
by itself.
Cleaning and care
Allow all the parts to dry thoroughly before
you put the product away again. This will pre-
vent the formation of moulds, odours and dis-
colouration.
Clean the product with a slightly dampened,
lint-free cloth.
Always keep the product dry and clean at
room temperature.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
Bekijk gratis de handleiding van Livarno Lux HG06103, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | HG06103 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4511 MB |
