Livarno Lux HG06009A handleiding
Handleiding
Je bekijkt pagina 20 van 29
20 GB/MT
Avoid the danger of
death from electric shock!
Before use, ensure that the mains voltage
available is the same as the required operat-
ing voltage for the product (220‒240 V∼).
Before connecting the product to the mains
you should always check the light chain and
the mains adapter for any damage.
Never use the product if you discover that it is
damaged in any way.
This products external flexible wiring is non-
replaceable. Hence if it becomes damaged
you must dispose of the entire product.
Never open any of the electrical parts or in-
sert any kind of object into them.
Protect the mains cable from sharp edges,
mechanical loads and hot surfaces.
Do not install with sharp fasteners or nails.
Always unplug the power pack from the socket
before installation, dismantling or cleaning.
Never touch the product plug or the product
itself with wet hands.
The product must not be electrically connected
to another ligth chains.
If the product is not in use for any length of
time (e.g. holidays), disconnect it from the
power supply.
If you have any questions about the product
or are unsure about any of its aspects, please
seek the advice of an electrical equipment
specialist.
Only use the product with the supplied power
pack for the type Model No.: S0135G045W2D;
all warranty claims will otherwise expire.
The light chain is protected against splashes
of water (IP44) as long as the socket meets
the minimum protection standard.
The LED driver can only be replaced by a
professional.
Mounting the lampions
(see Fig. B)
Lay down the lanterns
5
with the eyelets
6
(bigger openings) facing upwards.
Insert the cordless end of the lantern stretcher
9
into the lampion’s upper and lower open-
ing. While doing so place the the lantern
stretcher’s two arms
8
centrally onto the rim
of the lower opening.
Hold on to the lantern stretcher. Pull the
eyelets
6
upwards and hang them onto the
hangers
7
.
You can fix the product on the of window
frames or stair railings and fix the product by
attaching it with the help of mounting material
such as cable ties. (Mounting material is not
included).
Use
Insert the plug on end of the light chain
1
into
the socket of the mains adapter
2
.
Turn the connecting cap
4
of the mains lead
clockwise to fix the connection.
Insert the mains adapter
2
into the mains
socket. Push the timer button
10
, the product
is (permanently) switched on.
Please note that the power adapter continues
to draw a small amount of power even if the
product is turned off as long as the power
adapter is plugged into a power outlet. To
switch the product off completely, unplug the
power adapter from the socket.
Timer function
The Timer button
10
has three functions:
1 x press of the button:
The product lights up continuously.
2 x press of the button:
The product lights up continuously for 6 hours
and then switches itself off for 18 hours. The
product will then switch on again for 6 hours
at the allocated time and then switch off for
18 hours.
Note: The Timer button
10
lights up when
the timer function has been activated.
Bekijk gratis de handleiding van Livarno Lux HG06009A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | HG06009A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2531 MB |
