Livarno Lux 858 handleiding
Handleiding
Je bekijkt pagina 43 van 85
44
GB/IE/NI/CY/MT
TRIPPING HAZARD!
Please make
sure that the power cable is routed
in such a way that nobody can
tread on it or trip over it.
z Assembly and installation
Please note:
Take the product out of its
packaging and remove all packing material.
Check that all package contents are
present.
Check if the product or individual parts are
damaged. Should you detect damage, do
not use the product. Please contact the
retailer via the service address indicated.
Insert the LED module
6
into the open LED
star
1
via the designated xture as shown
in Fig. D.
Fold the lower side upwards and close the
star. Attach the LED module
6
on the left
and right sides using the gland nut
2
(see
Fig. D).
Hang the product in a location of your
choosing.
FIRE HAZARD!
Never hang the product above an
open re or heat source. This may
damage the product and excessive heat
build-up can cause a re.
RISK OF DAMAGE!
Take sufcient
measures to secure the product from
falling down.
Use the hook
5
provided to hang the
product from a suitable ceiling (see Fig. A).
Connect power supply
RISK OF ELECTRIC SHOCK!
Plug the connector
8
into the socket
9
of
the mains plug
3
(see Fig. B).
Tighten the union cap
7
on the screw
thread of the connection socket
9
�
Plug the mains plug
3
into a socket that
has been correctly installed.
Please note:
When using outdoors, plug
the mains plug
3
in to an IPX4 socket to
ensure splash protection.
z Operation
DANGER OF OVERHEATING!
Do
not operate the product while it is
still inside the packaging!
Please note:
Only use the product with the
supplied mains plug. Do not connect the
product or the mains plug to any external
devices.
Please note:
The product stays lit as long as
it is connected to the power supply. If you
unplug it, the product will automatically
switch off.
Timer function
To activate the timer function, keep the
button
10
on the mains plug
3
pressed
down until the LED light turns green (see
Fig. C). The timer has now been activated.
When the timer function is switched on, the
product is switched on for 6 hours and then
switched off for 18 hours.
Replacing the LEDs
RISK OF ELECTRIC SHOCK!
Incorrect handling of the product or
incorrect installation may potentially
result in personal injury.
The light source of this product may only be
replaced by the manufacturer, their
designated service technician, or a similarly
qualied person.
Instructions for replacing the LEDs for
qualied professionals are available on our
website: www.citygate24.de
All technical data can be found on our
website: www.citygate24.de
Bekijk gratis de handleiding van Livarno Lux 858, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | 858 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9591 MB |
