Livarno Lux 14144105L handleiding
Handleiding
Je bekijkt pagina 17 van 60
17 GB/IE
Safety Safety / Initial use
WEAR PROTECTIVE GLOVES!
Leaked or damaged batteries / rechargeable
batteries can cause burns on contact with the
skin. Wear suitable protective gloves at all
times if such an event occurs.
In the event of a leakage of batteries /
rechargeable batteries, immediately remove
them from the product to prevent damage.
Only use the same type of batteries / recharge-
able batteries. Do not mix used and new bat-
teries / rechargeable batteries.
Remove batteries / rechargeable batteries if the
product will not be used for a longer period.
Risk of damage of the product
Only use the specified type of battery /
rechargeable battery!
Insert batteries / rechargeable batteries according
to polarity marks (+) and (-) on the battery /
rechargeable battery and the product.
Clean the contacts on the battery / rechargeable
battery and in the battery compartment before
inserting!
Remove exhausted batteries / rechargeable
batteries from the product immediately.
Only applies to the lamp:
This product has a built-in rechargeable battery
which cannot be replaced by the user. The
removal or replacement of the rechargeable
battery may only be carried out by the manufac-
turer or his customer service or by a similarly
qualified person in order to avoid hazards. When
disposing of the product, it should be noted that
this product contains a rechargeable battery.
Initial use
Note: Remove all packaging materials from the
product.
Charging the lamp
The lamp must be dry and sheltered when charging.
Open the cover on the USB port
9
on the
lamp head
1
.
Connect the USB cable
2
to the micro USB
port on the lamp.
Insert the USB connector into a suitable USB
socket e.g. plug-in adapter, computer or similar.
When the lamp is charging, the LED on the
underside of the lamp head
1
lights up red.
Leave the lamp to charge up fully. When it is
fully charged, the LED on the underside of the
lamp head
1
lights up green.
Remove the USB cable
2
from the USB socket
and lamp.
Carefully replace the cover on the USB port
9
.
Installing the lamp
The lamp can be used in 3 variations.
1st variant: Table lamp with base (see Fig. B):
Screw the upright tube
6
clockwise into the
base
5
.
Attach the lamp head
1
to the upright tube
6
.
2nd variant: Table lamp without base
(see Fig. C):
You can turn the lamp head
1
upside down
and use this as a separate lamp.
3rd variant: Pendant light (see Fig. D):
Guide the hanging cord
3
through the
designated hook
7
on the lamp.
Knot the hanging cord
3
as shown in Fig. D.
Hang the lamp up in your chosen location.
Your lamp is now ready to use.
Bekijk gratis de handleiding van Livarno Lux 14144105L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | 14144105L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5671 MB |
