Livarno Lux 1119-W handleiding
Handleiding
Je bekijkt pagina 35 van 67
35
GB/IE/NI/CY/MT
Protect the mains from sharp edges,
mechanical stress and hot surfaces.
Never touch the mains adapter if your
hands are wet.
Never touch the uninsulated part of the
mains plug when plugging it in or out!
Never carry the product by the mains
power cable.
Fully unwind the cable before using it.
You should only connect the product to an
easily accessible power outlet socket so that
you can quickly disconnect it from the
power supply in the event of a fault.
Always unplug the mains plug before
assembling, dismantling or cleaning the
product.
Always plug out the product if it is not
going to be used for an extended period,
e.g. holiday, or if you want to set it up in a
different place.
Before using the product, make sure that the
mains voltage matches the supply voltage
required by the product (see “Technical data”).
If the product has any identiable faults,
stop using it immediately.
RISK OF INJURY!
Incorrect handling of the product
may potentially result in personal
injury.
The light source may only be replaced by
the manufacturer, service technician or a
similarly qualied person.
Never look directly into the light source.
Do not connect the product to a power
source while still inside the packaging.
There is a risk of overheating!
WARNING! DO NOT USE THE LIGHT
CHAIN UNLESS ALL SEALING RINGS
HAVE BEEN PROPERLY MOUNTED.
The operating unit is intended exclusively
for use with LED modules.
The control gear of this product may only
be replaced by the manufacturer, its
designated service technician, or a similarly
qualied person.
TRIPPING HAZARD!
Please make
sure that the power cable
2
is
routed in such a way that nobody
can tread on it or trip over it.
z Assembly and installation
FIRE HAZARD!
Never hang the product above an
open re or heat source. This may
damage the product and excessive heat
build-up can cause a re.
RISK OF DAMAGE!
Take sufcient measures to secure
the product from falling down.
Connect power supply
RISK OF ELECTRIC SHOCK!
Plug the connector
5
into the
socket
6
of the mains plug
1
(see
Fig. B).
Tighten the union cap
4
on the screw
thread of the connection socket
6
�
Plug the mains plug
1
into a socket that
has been correctly installed.
Please note:
When using outdoors, plug
the mains plug
1
in to an IPX4 socket to
ensure splash protection.
z Operation
DANGER OF OVERHEATING!
Do
not operate the product while it is
still inside the packaging!
Please note:
Only use the product with the
supplied mains plug. Do not connect the
product or the mains plug to any external
devices.
Please note:
The product stays lit as long
as it is connected to the power supply. If you
unplug it, the product will automatically
switch off.
Bekijk gratis de handleiding van Livarno Lux 1119-W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | 1119-W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7416 MB |
