Lincoln Electric RealWeld handleiding
Handleiding
Je bekijkt pagina 27 van 52
B-11
OPERATION (INSTRUCTOR MODE)REALWELD
®
TRAINER
9. When the calibration has been completed, the Calibrate Tool
window will display a checkmark and will say ‘Calibration
Complete’. This window will automatically close. After the
Calibrate Tool window automatically closes, the tool editor window
will remain open. See Figure B.46.
10. The calibration needs to be saved and this is done by selecting
the ‘Save’ icon in the tool editor window. This will automatically
update the ‘Last Calibration Update’ field with the current
calibration date. See Figure B.47.
11. Close the tool editor window by selecting the red “X” icon in the
top right corner of the tool editor window.
12. Remove the calibration markers from the GMAW gun.
13. Place the nozzle and contact tip onto the weld tool.
14. Close the camera lenses.
SMAW TORCH CALIBRATION
1. Before beginning the tool calibration procedure, place the jig and
work piece onto the jig platform.
2. Carefully attach the calibration markers to the SMAW torch. See
Figure B.48.
3. Open the camera lenses.
4. Select the ‘Tool Calibration’ icon. This will bring up a list of tools
that has been saved to the system. See Figure B.49.
5. Select ‘SMAW’ from the list of tools.
6. Select the ‘Edit’ icon on the left side of the screen. This will bring
up the ‘Tool Editor’ window. See Figure B.50.
7. Select the electrode angle (90º, 45º, 135º).
CALIBRATION MARKERS
Figure B.46 – Calibration complete
Figure B.47 – Last calibration update
Figure B.48 – SMAW torch calibration markers
Figure B.49 – Tool list
Figure B.50 – Tool editor
Bekijk gratis de handleiding van Lincoln Electric RealWeld, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lincoln Electric |
| Model | RealWeld |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13902 MB |
