Lincoln Electric RealWeld handleiding
Handleiding
Je bekijkt pagina 12 van 52
A-2
INSTALLATIONREALWELD
®
TRAINER
4. Using a 3/8” nutdriver, remove the screw securing each of the
three fixtures to the crate. See Figure A.4 and A.5. Remove
fixtures and set aside.
5. Using a 3/8” nutdriver, remove the screw securing the jig platform
to the crate. See Figure A.6. Remove the jig platform and set
aside.
6. Remove the protective tape from the wheels on the bottom of the
stand.
7. Remove the two carriage bolts, washers and lock washers
securing the brace to the crate. See Figure A.7.
8. With the help of an assistant carefully tilt the trainer into the
upright position.
9. With the help of an assistant, carefully slide the trainer stand
forward a couple of inches, to allow the stand to be removed from
the crate.
10. With the help of an assistant, carefully slide the trainer/stand
assembly out of the crate.
11. Position the trainer/stand into the desired work area.
12. Adjust the feet on the bottom of the stand so the trainer/stand is
level. See Figure A.8.
FIXTURE SCREWS
FIXTURE SCREW
JIG PLATFORM
Figure A.4 – Fixture removal
Figure A.5 – Fixture removal
Figure A.6 – Jig platform removal
CARRIAGE BOLTS
BRACE
Figure A.7 – Brace removal
FEET
Figure A.8 – Feet adjustment
Bekijk gratis de handleiding van Lincoln Electric RealWeld, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lincoln Electric |
| Model | RealWeld |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13902 MB |
