Lincoln Electric Prism Wall Mount handleiding

Niet gecategoriseerd

Lincoln Electric

36 pagina's

PDF beschikbaar

Handleiding

A-5

INSTALLATION

NOTE: The installation may be made permanent by running two

screws in through the bottom housing against the mounting

bracket. See Figure A.6.

6. Replace the lter cover and fasten latches.

7. 8 in. hose gets clamped to the 8 in. side of the reducer with hose

clamp. Then the 6.4” side of reducer goes over the outlet of the

fan and secured with 3 sheet metal screws. See Figure A.7

NOTE: When installing in combination with the Prism® 4200 fan,

rst mount exible outlet with steel bushing (included with

Prism® 4200 fan package) on the fan housing.

8. Install the 8 in. sealing ring on the inlet side of the hose.

9. Slide the 8 in. diameter connection hose over the sealing ring on

the inlet by placing the hose all the way over the sealing ring.

Secure with a 8 in. diameter hose clamp. See Figure A.8.

In case the lter unit is mounted left of the

Prism 2400, the Prism 2400 will be in reverse

position, resulting in centerpoints of fan

outlet and Prism Wall Mount (/HE) inlet not

aligning. This will not affect system performance.

ATTENTION

FIGURE A.7

FIGURE A.8

FAN OUTLET

8 in. DIAMETER

CONNECTION HOSE

8 in. HOSE CLAMP

REDUCER 6.4 in. - 8 in.

FIGURE A.6

8 in. DIAMETER CONNECTION HOSE

INLET

PRISM

WALL MOUNT

Bekijk gratis de handleiding van Lincoln Electric Prism Wall Mount, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.