Lincoln Electric Fume Extraction Arms handleiding

Niet gecategoriseerd

Lincoln Electric

50 pagina's

PDF beschikbaar

Handleiding

A-21

INSTALLATIONFUME EXTRACTION ARMS

MOUNTING

FLEXIBLE LOW

CEILING 13 FT. ARM

Components

*NOT SHOWN

See Parts Page for Hardware Bag Contents

For wall mounting applications:

Install wall mounting brackets as detailed in the section titled

“INSTALLATION OF WALL MOUNTING BRACKETS” for Operator

Manual included with the Prism 2400 Stationary Fan.

MOUNTING THE LC EXTRACTION ARM ON THE

WALL BRACKET

See Figure A.31 for steps 1-4

1. Cut through the upper and lower cable ties (Item A). The

cotter pin is not used for wall mount applications.

FIGURE A.31

2. The mounting assembly of the arm comes in three pieces:

(See to Figure A.32)

• Metal rotating rod (Item A),

• red plastic ring (Item B),

• and metal spring collar pivot rod (Item C).

FIGURE A.32

K1655-13 – LC, 13FT EXTRACTION ARM

ITEM DESCRIPTION QTY

1 ARM BODY (2 SEPARATE PIECES) 1

2 HOSE SUPPORT 1

3 HOOD ASSEMBLY 1

4 FLEXIBLE HOSES 3

5 MOUNTING ASSEMBLY 1

6* INSTRUCTION MANUAL 1

7* LOOSE HARDWARE BAG 1

Mount the red plastic ring to the metal mounting assembly by

fitting the metal spring collarpivot rod through the hole in the

rotating rod, and snapping it into place on the U-shaped

indents on the red plastic ring. The lip of the ring should fit

securely against the top edge of the mounting assembly yet

rotate with the rod.

Bekijk gratis de handleiding van Lincoln Electric Fume Extraction Arms, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.