Handleiding
Je bekijkt pagina 21 van 72
Document #: LIN_EOGO_IOM_24APERION_4605890_Rev1 - 01/24 21
Introduction
This section will guide you on the operation of the easyTouch
controls on your new Lincoln Aperion Impinger® oven.
Startup
1. Ensure that your oven is connected to an electrical supply.
Move the On/Off switch to the ON position
• The display screen will energize and show the Lincoln
oven model number, current software version and
serial number (Figure 1). This screen will transition
after a few seconds to the Home Screen.
Figure 1
NOTE: Electric ovens will not start pre-heating until
you have selected a recipe. Gas ovens will begin
heating and circulating air after powering on.
2. The Home screen displays 4 buttons: Press & Go, which
takes you to the Recipes screen; Manual mode; the
Settings screen; and the Diagnostics button, which
provides basic information about your oven. (Figure 2)
Settings
Press & Go
Diagnostics
Manual Mode
Figure 2
RECIPE SELECTION PRESS & GO BUTTON
1. Touch the Press & Go button to display the 20 pre-set
recipes. Press any of the numbered buttons or images to
select the recipe. (Figure 3 and Figure 4)
A. The display screen will change to show the settings
for the recipe selected.
Figure 3
Section 3
Operation and Programming
SOUND LEVELS
MEASURED 2’ FROM
FRONT
56 dBA @ 40% Blower Speed (ECO
MODE)
66 dBA @ 70% Blower Speed
74 dBA @ 100% Blower Speed
OPERATING
TEMPERATURE RANGE
250° - 600°F (121° - 316°C)
Bekijk gratis de handleiding van Lincoln Aperion 2424, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lincoln |
| Model | Aperion 2424 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 23734 MB |
