Linarie Albi LIN30C2Z handleiding
Handleiding
Je bekijkt pagina 29 van 33
11
All installation work must be carried out by a competent
person or a qualified electrician. Before connecting the
power supply, make sure that the mains voltage
corresponds to the voltage indicated on the nameplate
inside the hood.
Warning: THIS EQUIPMENT MUST BE CONNECTED.
Warnings
1)
the ceramic hotplate must be installed by qualified personnel or technicians. We have professionals at your
service, never carry out the operation yourself.
2)
The hob must not be installed directly above an appliance.
dishwasher, refrigerator, freezer, washing machine or tumble dryer, as moisture may damage the hob's electronic
components.
3)
The ceramic heating plate should be installed in such a way as to ensure better heat radiation to improve its
reliability.
4)
The wall and induced-heating zone above the table surface must be heat-resistant.
5)
To prevent damage, the sandwich layer and adhesive must be heat-resistant.
Connecting the hob to the mains
This hob must only be connected to the mains supply by a suitably qualified person.
Before connecting the hob to the mains, check that
1. The domestic wiring system is adapted to the power absorbed by the hob.
2. The voltage corresponds to the value shown on the nameplate.
3. The sections of the power cable can withstand the load specified on the rating plate. Do not use adapters,
reducers or branches to connect the hob to the mains, as they may cause overheating and a fire.
The power cable must not come into contact with hot parts and must be positioned so that it is not too long.
The
temperature will not exceed 75˚C at any time.
•
Check with an electrician that the domestic wiring system is suitable without modification. Any modifications must
be carried out by a qualified electrician.
This device is supplied with a three-core power cable, colored as follows:
Brown = L or Live
Blue = N or Neutral
Green and yellow = E or EARTH
This appliance requires a 32-amp miniature circuit breaker.
-
If the cable is damaged or needs replacing, the operation must be carried out by an after-sales agent using
specific tools to avoid any accidents.
-
If the appliance is connected directly to the mains, a monopolar circuit breaker must be installed with a minimum
opening of 3 mm between the contacts.
-
The installer must ensure that the electrical connection is correct and complies with safety regulations.
-
The cable must not be bent or compressed.
-
The cable must be checked regularly and replaced only by authorized technicians.
www.linarie.com.au
Bekijk gratis de handleiding van Linarie Albi LIN30C2Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Linarie |
| Model | Albi LIN30C2Z |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3743 MB |