Handleiding
Je bekijkt pagina 17 van 24
Fig. 35 Example illustration depending on the previously
set temperature
u
Carry out the action steps according to the illustration
until you hear the confirmation tone.
w
Defrosting cycle is cancelled.
w
The device continues to run in normal mode. LED of the
previously set temperature lights up.
w
You are in the main menu.
Demo mode
Demo mode is a special feature for dealers who want to
demonstrate device features. If you activate demo mode, all
refrigeration functions are deactivated and you cannot open
the submenu.
If you activate and then deactivate demo mode, the device
will be reset to factory defaults. (see Resetting to factory
settings)
Activating demo mode
Fig.36
u
Touch the touchbutton as shown in the illustration for
3 seconds until you hear the confirmation tone.
w
Device is switched off.
u
Touch the touchbutton as shown in the illustration for
10 seconds until you hear the confirmation tone after
10seconds.
w
All temperature LEDs light up twice for a short time:
Demo mode is activated.
w
Device is switched off.
u
Switch on the device. (see Switching on the device)
w
The device is in demo mode.
Deactivating demo mode
Fig.37
u
Touch the touchbutton as shown in the illustration for
3 seconds until you hear the confirmation tone.
w
Device is switched off.
u
Touch the touchbutton as shown in the illustration for
10 seconds until you hear the confirmation tone after
10seconds.
w
All temperature LEDs light up twice for a short time:
Demo mode is deactivated.
w
Device is switched off.
u
Switch on the device. (see Switching on the device)
Resetting to factory settings
Use this function to reset all settings to factory defaults.
All settings you have made so far are reset to their original
settings.
Application:
-
Reset device
Performing a reset
The function is located in the submenu at the position of
LED 3.
Fig.38
u
Carry out action steps according to the illustration.
w
LED 3 lights up.
w
After 5 seconds without interaction, the device is reset
and restarted.
w
Device is reset.
w
LED 2 lights up: Temperature is set to -18 °C at the
factory.
w
The device cools to the target temperature set at the
factory.
7.3 Messages
Messages are indicated audibly by an alarm tone and visu‐
ally by the LEDs flashing in the display. Different LEDs flash
depending on the type of message.
You can end the following messages yourself. For all
other messages, you must contact the customer service.
(see 10.4 Customer Service)
Message
Cause Exit the
message
The alarm tone
sounds at an ever-
increasing volume.
Interior lighting
pulses.
Door alarm
The message appears
if the door is
open for more than
60seconds.
Carry out
action steps
(see Door
alarm) .
LED 1-5 flash.
Alarm tone sounds.
Interior lighting
pulses.
Power outage
alarm
The message appears
when a power failure
has occurred and the
freezing temperature
has changed.
Carry out
action steps
(see Power
outage
alarm) .
LED 1-5 flash.
Alarm tone sounds.
Interior lighting
pulses.
Temperature alarm
The message appears
if the temperature
does not correspond
to the set tempera‐
ture.
Carry out
action steps
(see Tempera‐
ture alarm) .
Overview of messages
7.3.1 Ending messages
Door alarm
Controls
* Depending on model and options 17
Bekijk gratis de handleiding van Liebherr TG 14Vc04, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | TG 14Vc04 |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 3586 MB |
