Handleiding
Je bekijkt pagina 22 van 24
Note
Water filters are available from the Liebherr-Hausgeräte
store at home.liebherr.com/shop/de/deu/zubehor.html.
16.1 Inserting the water filter
Fig.55
u
Remove the drawer compartment.
u
Insert the water filter and rotate approx. 90° clockwise
until it clicks in.
u
Check that the filter is sealed and no water leaks out.
u
Insert the drawer compartment.
CAUTION
Risk of infection due to potential particulate matter in new
water filters!
Nausea and vomiting.
u
After replacing the filter: Draw and dispose of 3l water at
the InfinitySpring.
w
The water filter is now ready for use.
17 Connecting the appliance to the
power supply
WARNING
Danger of electric shock and injury due to damaged appli‐
ance or damaged mains cable!
Danger of cuts and fatal injuries. If the appliance or the
mains cable is damaged during transport, you may be elec‐
trocuted. You could also cut yourself on damaged parts of
the appliance housing.
u
Check the appliance and the mains cable for damage
after transport.
u
Never put the appliance into operation if the appliance or
the mains cable are damaged.
u
Contact Customer Service.
You can connect your appliance to the mains using the
power cable supplied separately. The mains power cable
has an appliance coupler at one end and a mains plug at the
other end.
Make sure that the following requirements are fulfilled:
-
The appliance and power cable are undamaged.
-
The appliance is set up in accordance with the regula‐
tions. (see9 Mounting wall spacers)
-
Requirements for the electrical connection are met.
(see2 Installation conditions)
-
Dimensions for connection in accordance with regula‐
tions are known and observed. (see 5 Connection dimen‐
sions for the power supply)
-
Mains voltage and frequency correspond to the specifica‐
tions on the type plate.
-
The socket is earthed according to the regulations and
fused.
-
The fuse tripping current is between 10A and 16A.
-
The socket is easily accessible and is not behind the
appliance. (see 5 Connection dimensions for the power
supply)
NOTICE
Danger of damage to incorrect operation!
Damage to the electrical components of the appliance.
u
Only use the supplied mains cable.
WARNING
Danger of fire due to incorrect connection!
Burns.
Damage to the appliance.
u
Do not use an extension cable.
u
Do not use distributor blocks.
NOTICE
Danger of damage to incorrect connection!
Damage to the appliance.
u
Do not connect the appliance to a stand-alone inverter,
e.g. solar power systems and petrol generators.
u
Connect the mains cable plug to the power supply.
Ensure that the plug is tightly in the socket.
w
The Liebherr logo appears in the display.
w
The display switches to the standby symbol.
w
If no action occurs within 60 seconds: The standby
symbol fades or disappears.
w
The appliance is connected. For information regarding
first use, see the following section or the operating
instructions.
Connecting the appliance to the power supply
22 * Depending on model and options
Bekijk gratis de handleiding van Liebherr SWNsdh 5264 Prime, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SWNsdh 5264 Prime |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6456 MB |
