Handleiding
Je bekijkt pagina 13 van 24
Fig. 26
u
Use screwdriver to unscrew both screws.
u
Lift up and remove the bearing bracket.
u
Lift up and remove the bearing bracket and cable.
Fig.27
u
Pull the bearing bush Fig.27(1) out of the guide.
u
Swivel the cable holder Fig.27(2) out.
Fig.28
u
Remove the cable with the cable holder Fig. 28 (3) from
the swap bearing block.
Fig.29
u
Insert the cable mirror-inverted in the upper groove of the
cable holder.
w
Place the middle marking Fig. 29 (1) on the edge of the
cable holder.
u
Swing in the cable holder.
Fig.30
u
Insert the bearing bush from the other side and latch it
into place.
NOTICE
Danger of cable crushing
u
Pay attention to the markings when routing the cable.
The cable end with the double marking must be routed
into the door end piece.
Fig.31
After making the change, the cable routing must be as
shown in the illustration.
Door hinge change
* Depending on model and options 13
Bekijk gratis de handleiding van Liebherr SWNsdh 5264 Prime, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SWNsdh 5264 Prime |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6456 MB |
