Handleiding
Je bekijkt pagina 28 van 36
Fig. 100
► Pull out the filter.
Fig. 101
► Insert the new filter.
Fig. 102
► Push the drawer in.
Fig. 103
► Set the panel back in place.
9.2 Disassembling / assembling pull-
out systems
9.2.1 Notes on disassembly
You can disassemble some of the pull-out systems for
cleaning. Your appliance can contain a variety of pull-
out systems.
The following pull-out systems can be disassembled or
cannot be disassembled:
Pull-out system
can be disassembled/
cannot be disassembled
Partial-extension
in the freezer
section
can be disassembled (see Partial
pull-out freezing compartment)
9.2.2 Drawer on telescopic rails
Partial pull-out freezing compartment
Disassembling pull-out system
Make sure that the following requirements are fulfilled:
❑
Drawer has been removed.
❑
Glass shelf has been removed.
Fig. 104 Glass shelf with rails
► Push up front click-in hooks. Fig. 104(1)
► Slide pull-out rails to the side Fig. 104 (2) and back‐
wards Fig. 104(3).
Installing pull-out system
Fig. 105 Glass shelf with rails
► Hook in rail at the back. Fig. 105(1)
► Hook in rail at the front. Fig. 105(2)
9.3 Defrosting the appliance
Defrosting is performed automatically. The water from
the thawing process runs out via the drain opening and
is evaporated.
Water droplets or a thin layer of frost or ice can form
on the rear wall; this is a completely normal part of the
appliance’s function. You do not have to remove them.
► Clean the drain hole regularly. (see 9.4 Cleaning the
appliance)
Maintenance
28 * Depending on model and options
Bekijk gratis de handleiding van Liebherr SW5291, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SW5291 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4544 MB |
