Liebherr SRTvh 1511 Perfection handleiding

Koelkast

Liebherr

48 pagina's

PDF beschikbaar

Handleiding

Appliance battery

Type 1S2P/NCR 18650BF

Nominal voltage 3.6 VDC

Capacity 6.7Ah

9.2 Technical fault

Your appliance is designed and built to ensure it works reli‐

ably and has a long service life. In the unlikely event that

a fault occurs during operation, please check whether the

fault is due to an operating error. If this is the case, you will

be charged for the cost incurred even if this falls within the

warranty period.

You can fix the following faults yourself.

9.2.1 Appliance function

Defect Cause Remedy

The appliance is

not working.

→ The appliance is not switched on.

Switch on the appliance.

→ The mains plug is not properly

plugged into the socket.

Check the mains plug.

→ There is something wrong with the

fuse in the socket.

Check fuse.

→ Power cut

Keep the appliance closed.

If necessary move the refrigerated/frozen items to

another fridge or freezer if the power is off for a

prolonged period.

→ The IEC socket is not plugged into

the appliance correctly.

Check the IEC socket.

Temperature is not

cold enough.

→ The appliance door is not closed

properly.

Close appliance door.

→ Ventilation is not sufficient.

Clear ventilation grille and clean it.

→ The ambient temperature is too

high.

Ensure the correct ambient conditions: (see1.4 Range of

use of appliance)

→ The appliance was opened too

many times or for too long.

Wait to see if the appliance goes back to the required

temperature by itself. If not, contact Customer Service.

(see 9.3 Customer Service)

→ The temperature is set incorrectly.

Set a colder temperature and check after 24 hours.

→ The appliance is too close to a heat

source (oven, radiator, etc).

Change where the appliance or the heat source are

located.

9.3 Customer Service

First check whether you can remedy the fault yourself . If

this is not the case, please contact Customer Service.

You can find the address in the enclosed brochure “Liebherr-

Service” or at home.liebherr.com/service.

WARNING

Unprofessional repair!

Injuries.

Have any repairs and action - not expressly specified -

on the appliance and mains cable carried out by service

personnel only. (see8 Maintenance)

A damaged mains cable may only be replaced by the

manufacturer, the manufacturer’s Customer Service or a

similarly qualified person.

In the case of appliances with an IEC connector, the

change may be made by the customer.

9.3.1 Contacting Customer Service

Make sure you have the following appliance data at the

ready:

Appliance name (model and index)

Service no. (Service)

Serial no. (S no.)

Access the appliance information via the display

(see6.2.16 Device information ) .

-or-

Refer to the type plate for appliance information.

(see 9.4 Type plate)

Note down appliance information.

Inform Customer Service: Report faults and the appliance

information.

This will help us to provide a fast and focussed service.

Follow any further instructions provided by Customer

Service.

9.4 Type plate

The type plate is inside the appliance. See appliance over‐

view.

Customer help

42 * Depending on model and options

Bekijk gratis de handleiding van Liebherr SRTvh 1511 Perfection, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.