Handleiding
Je bekijkt pagina 19 van 48
Fig.55
u
Screw on the worktop.
4.12 Aligning the door
If the door is not straight, you can adjust it on the lower
hinge.
Fig.56
u
Remove the middle screw on the lower hinge.
Fig.57
u
Slightly undo both screws and move the door with the
hinge to the left or right.
u
Fully tighten the screws (the middle screw is no longer
needed).
w
The door is now straight.
4.13 Connecting the appliance to the
power supply
WARNING
Danger of electric shock and injury due to damaged appli‐
ance or damaged mains cable!
Danger of cuts and fatal injuries. If the appliance or the
mains cable is damaged during transport, you may be elec‐
trocuted. You could also cut yourself on damaged parts of
the appliance housing.
u
Check the appliance and the mains cable for damage
after transport.
u
Never put the appliance into operation if the appliance or
the mains cable are damaged.
u
Contact Customer Service.
You can connect your appliance to the mains using the
power cable supplied separately. The mains power cable
has an appliance coupler at one end and a mains plug at the
other end.
Make sure that the following requirements are fulfilled:
-
The appliance and power cable are undamaged.
-
The appliance is set up in accordance with the regula‐
tions. (see 4.5 Installing door handle)
-
Requirements for the electrical connection are met.
(see4.1 Installation conditions)
-
Dimensions for connection in accordance with regula‐
tions are known and observed.
-
Mains voltage and frequency correspond to the specifica‐
tions on the type plate.
-
The socket is earthed according to the regulations and
fused.
-
The fuse tripping current is between 10A and 16A.
-
The socket is easily accessible and is not behind the
appliance.
NOTICE
Danger of damage to incorrect operation!
Damage to the electrical components of the appliance.
u
Only use the supplied mains cable.
WARNING
Danger of fire due to incorrect connection!
Burns.
Damage to the appliance.
u
Do not use an extension cable.
u
Do not use distributor blocks.
NOTICE
Danger of damage to incorrect connection!
Damage to the appliance.
u
Do not connect the appliance to a stand-alone inverter,
e.g. solar power systems and petrol generators.
Putting into operation
* Depending on model and options 19
Bekijk gratis de handleiding van Liebherr SRTvh 1511 Perfection, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SRTvh 1511 Perfection |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6924 MB |
