Liebherr SRTvh 1501 Perfection handleiding

Koelkast

Liebherr

58 pagina's

PDF beschikbaar

Handleiding

► If necessary: Navigate to the desired function.

3.3 Sleep mode

If you do not touch the display for 1 minute, the display

switches to sleep mode. In sleep mode, the display

brightness is dimmed.

3.3.1 Ending sleep mode

► Touch the display briefly with your finger.

▷ Sleep mode is ended.

4 Start-up

4.1 Setup conditions

WARNING

Risk of fire due to moisture!

If live parts or the power cord get wet, this can cause a

short circuit.

► The appliance is designed for use in enclosed

spaces. Do not operate the appliance in open space

or in damp areas or where there is spray.

4.1.1 Setup location

WARNING

Leaking refrigerant and oil!

Fire. The refrigerant contained within the appliance is

environmentally friendly, but flammable. The oil

contained within the appliance is flammable. Escaping

refrigerant and oil can ignite if they are of high enough

concentration and are exposed to an external heat

source.

► Do not damage the pipelines of the coolant circuit

and the compressor.

Do not setup the appliance in direct sunlight, next to

an oven, radiator or similar.

The best place to set up the appliance is a dry and

well ventilated room.

If the appliance is set up in a very humid environ‐

ment, condensation can form on the outside of the

appliance.

Always ensure sufficient airflow and ventilation in

the setup location.

The more refrigerant there is in the appliance, the

larger the space it is installed in must be. If the

space is too small, any leak may create a flammable

mixture of gas and air. For every 8 g (0.28 oz) of

refrigerant, the installation space must be at least

1m

(35.5ft

). Specifications on the refrigerant in the

appliance can be found on the serial tag plate inside

the appliance.

The floor of the setup location must be horizontal

and even.

The setup location must be able to withstand the

weight of the appliance plus the weight when

stocked to maximum capacity. (see 9.1 Technical

data)

If you set up the appliance on a raised surface, you

must install the anti-tip bracket.

If you place the appliance on top of another one, you

must install the connecting frame with anti-tip

bracket (included in the connecting frame).

If you place the appliance on a base with casters,

you must install the base with the anti-tip bracket

(included in the plinth with casters).

If you set up the appliance on a base with feet, you

must mount the base with the anti-tip bracket

(included in the base with feet).

The anti-tip bracket can be purchased from the

Liebherr-Hausgeräte store at home.liebherr.com/

shop/de/deu/zubehor.html.

Use in hazardous areas is not permitted.

4.1.2 Electrical connection

WARNING

Danger of fire due to incorrect positioning!

If the power supply cable or plug touches the back of

the appliance, the vibration can damage the power

supply cable or the plug resulting in a short circuit.

► Make sure the power supply cable is not trapped

under the appliance when you position the appli‐

ance.

► Install the appliance so that it does not touch any

plugs or power cables.

► Do not connect any appliances to sockets in the area

of the back of the appliance.

► Do not place and operate power strips/power

distributors and other electronic devices (such as

halogen transformers) at the back of the appliances.

4.2 Appliance dimensions

Start-up

* Depending on model and options 9

Bekijk gratis de handleiding van Liebherr SRTvh 1501 Perfection, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.