Liebherr SFTvh 1501 Perfection handleiding

Vriezer

Liebherr

46 pagina's

PDF beschikbaar

Handleiding

Message (red) Cause Remedy

Temperature alarm

This message appears if the temperature

does not match the set temperature.

Reasons for differences in temperature

can be:

Warm produce for cooling has been placed

inside.

Too much warm air has got in while you

were sorting out the freezer or removing

items.

The power was cut off for a prolonged

period.

Tap briefly.

Information about errors and appliance status are

displayed.

Tap briefly.

Warmest/coldest temperature, date and time are

displayed.

Tap briefly.

The status screen is displayed.

The current temperature and the alarm symbol

flash red until the set temperature is reached.

Check the quality of the refrigerated goods.

Error

The appliance is faulty, there is an appli‐

ance error or a component of the appliance

has a fault.

Store the cooled produce

elsewhere.

Tap briefly.

The error code (e.g. BT021) is

displayed.

Tap briefly.

A further error code is

displayed if there is one

Status screen is displayed

with flashing error symbol.

Swiping or tapping the display will show the error

code(s) again.

Make a note of error code(s) and contact

Customer Service. (see 9.3 Customer Service)

The message indicates unscheduled

defrosting behaviour. For example, the

evaporator could ice up to an unusual

extent due to prolonged door openings and

the defrosting time may no longer be suffi‐

cient.

Tap briefly.

DEFR.MAX is displayed.

Tap briefly.

Status screen is displayed

with flashing error symbol.

Swiping or tapping the display will show the

message again.

Store the cooled produce elsewhere and defrost

the appliance by hand. Alternatively, defrosting

can be started manually. (see 6.2.18 Defrosting )

The flashing error symbol disappears after a long

tap. If the message is displayed repeatedly and

the causes listed do not apply, contact customer

service. (see 9.3 Customer Service)

Power cut

The message appears following an inter‐

ruption to the electricity supply.

Tap briefly.

Battery’s state of charge, information about

errors and appliance status are displayed

Tap briefly.

The warmest temperature and the period of

power interruptions are displayed.

Tap briefly.

The status screen is displayed.

The current temperature and the alarm symbol

flash red until the set temperature is reached.

Check the quality of the refrigerated goods.

Controls

34 * Depending on model and options

Bekijk gratis de handleiding van Liebherr SFTvh 1501 Perfection, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.