Liebherr SFTvh 1501 Perfection handleiding

Vriezer

Liebherr

46 pagina's

PDF beschikbaar

Handleiding

If you switch on your appliance and a “D” appears on the

status display, demo mode is already activated.

If you activate and then deactivate demo mode, the appli‐

ance will be reset to factory defaults. (see 6.2.25 Resetting

to factory settings )

Activating demo mode

Fig. 155

Fig. 156

Carry out action steps according to the illustration.

Demo mode is activated.

Appliance is switched off.

Switch on the appliance. (see 4.14 Switching on appli‐

ance (first use))

“D” appears in the status display.

Deactivating demo mode

Fig. 157

Fig. 158

Carry out action steps according to the illustration.

Demo mode is deactivated.

Appliance is switched off.

Switch on the appliance. (see 4.14 Switching on appli‐

ance (first use))

Appliance is reset to factory settings.

6.2.25 Resetting to factory settings

Use this function to reset all settings to factory defaults.

All settings you have made so far are reset to their original

settings.

Performing a reset

Fig. 159

Fig. 160

Carry out action steps according to the illustration.

Device is reset.

Device is switched off.

Restart the device. (see 4.14 Switching on appliance (first

use))

6.3 Message

6.3.1 Warnings

Warnings are issued by means of an acoustic signal and

visually via a symbol on the display. The signal gets louder

until the warning is acknowledged.

Message (red)

Cause Remedy

Door open

This message appears if the door is open

for too long.

Close the door.

Tap briefly.

Alarm is stopped.

Note

The time until the message appears can be set.

(see6.2.21Door alarm )

Controls

* Depending on model and options 33

Bekijk gratis de handleiding van Liebherr SFTvh 1501 Perfection, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.