Handleiding
Je bekijkt pagina 46 van 52
9.3 Customer Service
First check whether you can remedy the fault yourself .
If this is not the case, please contact Customer
Service.
You can find the address in the enclosed brochure
“Liebherr-Service” or at home.liebherr.com/service.
WARNING
Unprofessional repair!
Injuries.
u
A damaged power cable may only be replaced by the
manufacturer, the manufacturer’s Customer Service
or a similarly qualified person.
u
For appliances with plug and play connection cables,
the change can be made by the customer.
9.3.1 Contacting Customer Service
Make sure you have the following appliance informa‐
tion ready:
q
Appliance name (model and index)
q
Service no. (service)
q
Serial no. (S no.)
u
Access the appliance information via the display
(see 6.2.15 Appliance information ) .
-or-
u
Refer to the type plate for appliance information.
(see 9.4 Type plate)
u
Note appliance information.
u
Inform Customer Service: Report faults and the
appliance information.
w
This will help us to provide fast and focused service.
u
Follow any further instructions provided by
Customer Service.
9.4 Type plate
The type plate is inside the appliance. See appliance
overview.
Fig. 157
(1)
Appliance designa‐
tion
(3) Serial No.
(2) Service No.
10 Shutting down
u
Empty the appliance.
u
Switch off appliance.
u
Pull the power plug from the outlet.
u
If necessary, remove the IEC socket: Pull the IEC
socket out of the appliance plug while turning it to
the left and right at the same time.
u
Clean the appliance. (see 8.3Cleaning the appliance)
u
If available: Remove the covers and insulation of the
sensor feed-through to prevent mold from forming.
u
Leave the door open so that no bad odors form.
Note
Damage to the appliance and malfunctions!
u
After shutting down, only store the appliance at the
permitted room temperature of between
-10°C(14°F) and +50°C(122°F).
11 Disposal
11.1 Preparing the appliance for
disposal
WARNING
Risk of child entrapment!
Before you throw away your old refrigerator or freezer:
u
Take off the doors.
u
Leave the shelves in place so that children may not
easily climb inside.
Liebherr uses batteries in some of its appli‐
ances. You should remove these before
disposal of the old appliance for environ‐
mental reasons. If your appliance contains
batteries, a corresponding notice is
attached to the appliance.
Lamps If you can remove the lamps yourself
without destroying them, also remove these
before disposal.
u
Take the appliance out of operation.
u
If possible: Remove lamps without destroying them.
11.2 Disposing of the appliance in an
environmentally friendly manner
The appliance still contains
valuable materials and must
be collected separately from
unsorted municipal waste so
it can be recycled.
Shutting down
46 * Depending on model and options
Bekijk gratis de handleiding van Liebherr SFTfg 1501 Performance, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SFTfg 1501 Performance |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 6773 MB |
