Liebherr SCB7760IM handleiding
Handleiding
Je bekijkt pagina 27 van 56
Setting the IceMaker-water inflow
Make sure that the following requirements are fulfilled:
q
IceMaker has been started for the first time.
(see 4.3 Starting the IceMaker for the first time)
q
IceMaker is activated. (see IceMaker / MaxIce )
Fig.78
Fig. 79 Example illustration: Switching from value 5 to
value6.
u
Carry out action steps according to the illustration.
w
IceMaker water inflow is set.
TubeClean
This function activates or deactivates TubeClean. Acti‐
vating TubeClean cleans the IceMaker lines.
Activating TubeClean
Make sure that the following requirements are fulfilled:
q
IceMaker cleaning is prepared. (see 9.6.7 Cleaning
the IceMaker)
q
Empty container with a capacity of 1.5 l (1.59 qt) and
with a maximum height of 10 cm (3 15/16 in) is
ready.
u
Place the container into the drawer below the
IceMaker.
Fig.80
Fig.81
u
Carry out action steps according to the illustration.
w
TubeClean is activated.
w
Cleaning process has started: Symbol flashes until
the cleaning process is automatically completed
after 60 minutes.
w
When the cleaning process is completed: Appliance
continues to run in normal operation.
Deactivating TubeClean
TubeClean is automatically completed after
60 minutes. However, you can also deactivate Tube‐
Clean at any time during the cleaning process:
Fig.82
u
Carry out action steps according to the illustration.
w
TubeClean is deactivated: Cleaning process is
canceled.
w
Appliance continues to run in normal operation.
CleaningMode
This function activates and deactivates CleaningMode.
CleaningMode enables you to comfortably clean the
appliance.
This setting relates to the fridge compartment.
Application:
-
Clean the fridge compartment. (see 9.6 Cleaning the
appliance)
-
Clean the InfinitySpring. (see 9.6.5 Cleaning the
InfinitySpring *) *
Appliance status with active CleaningMode
The status display continuously shows CleaningMode.
The fridge section is switched off.
The interior lighting is activated.
Reminders and warnings are not displayed. No signal
tone is sounded.
The InfinitySpring is out of order.*
Appliance status
Activating CleaningMode
Fig.83
Use
* Depending on model and options 27
Bekijk gratis de handleiding van Liebherr SCB7760IM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SCB7760IM |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8329 MB |
