Liberty DL-SCU33-SW handleiding

26 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 5 van 26
USER MANUAL / DL-SCU33-SW
5
REAR PANEL PRODUCT BREAKDOWN
MODES
SWITCHING BETWEEN MODES
BYOM Mode
BYOM (Bring Your Own Meeting) mode allows users to bring their own device to meeting.
1. USB-C or HDMI of LAPTOP IN will switch to 2 HDMI outputs of DISPLAY OUT.
2. USB clients will switch to the USB host connected to the LAPTOP IN (USB-B port if the HDMI source is
connected OR, the USB-C port.
3. Audio output will be extracted from USB-C or HDMO of the LAPTOP IN.
*Note: The HDMI signal will be selected if both USB-C and HDMI of LAPTOP IN are connected.
** Note: The USB-C will need to be set to manual or enabled for BYOM. By default, the USB-C port will
be set for Standard Mode.
Standard Mode
1. 2 HDMI inputs of ROOM PC IN will switch to DISPLAY separately. USB-C or HDMI of LAPTOP IN will
switch to SHARE OUT.
2. USB clients will switch to the USB-B host of ROOM PC IN.
3. Audio output will de-embedded from 1-HDMI of ROOM PC-IN.
Manual Switching
When the DIP switch next to the LAPTOP-IN is selected to MANUAL, the switcher is now in manual
switching mode.
One can select BYOM or STANDARD mode via:
Web GUI landing page
Occupancy sensor connected via digital i/o
Control from a third-party device
Predened schedule
Push button connected via contact closure can select BYOM or STANDARD mode via web GUI
QR code
Auto Switching
When the DIP switch of rear panel is selected to AUTO, the switcher is in auto-switching mode. BYOM or
STANDARD mode will be automatically selected by signal detected according to the following rules:
1. If the USB-C or USB-B signal of LAPTOP IN is detected, BYOM mode is selected.
2. If neither the USB-C or USB-B signal of LAPTOP IN is detected, STANDARD mode is selected.
The DL-SCU33-SW collaboration switcher provides two modes to select from which allows users to
choose from either a dedicated in-room PC running software or from their own laptop that they
brought into the meeting space. The switcher is NOT a matrix switcher, and does not allow for custom
routing of AV and USB signals.

Bekijk gratis de handleiding van Liberty DL-SCU33-SW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkLiberty
ModelDL-SCU33-SW
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4362 MB