Handleiding
Je bekijkt pagina 7 van 28
7
Mount the freezer and refrigerator
compartment doors
Feed water pipe Installation
Pass the refrigerator laterally through the access
door as shown in the right figure.
Automatic ice maker operation needs water pressure of 147~834 kPa
(1.5~8.5 kgf/cm
2
) (That is, an instant paper cup (180 cc) will be fully filled within
3 sec.).
If water pressure does not reach the rating 147 kPa (1.5 kgf/cm
2
) or below, it is
necessary to purchase a separate pressure pump for normal automatic icing and
cool water feed.
Keep the total length of the feed water pipe tube within 8 m and be careful for the
tube not be bent straightly. If the tube is 8 m or longer it may cause trouble in water
feed owing to the drain water pressure.
Install the feed water pipe tube at a place free from heat.
Connect to potable water supply only.
Mount them in the reverse sequence of removal after they pass through the access
door.
Pass the
refrigerator
Before
installation
Warning
1
2
3
45
M
ax
FRZ
TEMP
R
EF
TE
M
P
Min
5
4
32
1
M
a
x
Installation
Disposal of the
old appliance
This appliance contains fluid (refrigerant, lubricant)and is made of parts and materials
which are reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material
and can be reused after rework (recycling). For take back, please contact with the
local agency.
Bekijk gratis de handleiding van LG GR-P307BTB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | GR-P307BTB |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3194 MB |
