Handleiding
Je bekijkt pagina 12 van 32
12
INSTALLATION
WARNING
• The rear wall, adjacent and surrounding surfaces
must therefore be able to withstand a
temperature of 90 ℃.
Installing the Appliance
Before Installing the Hob
• Make sure that the work surface is square and
level, and no structural members interfere with
space requirements. An uneven surface can
cause the hob glass to crack unexpectedly due to
unequal surface pressures.
• Make sure that the work surface is made of a
heat-resistant and insulated material.
• If the hob is installed above an oven, the oven
must have a built-in cooling fan.
• The installation must comply with all clearance
requirements and applicable standards and
regulations.
• Make sure that a suitable isolating switch
providing full disconnection from the mains
power supply is incorporated in the permanent
wiring, mounted and positioned to comply with
local wiring rules and regulations.
• A device must be provided in the electrical
installation that allows the appliance to be
disconnected from the mains at all poles with a
contact opening width of at least 3 mm. Suitable
isolation devices include line protecting cut -
outs, fuses (screw type fuses are to be removed
from the holder), earth leakage trips and
contactors.
• The isolating switch must be easily accessible to
the customer with the hob installed.
• Consult local building authorities and by-laws if
in doubt regarding installation.
• Use heat-resistant and easy-to-clean finishes
(such as ceramic tiles) for the wall surfaces
surrounding the hob.
• The kitchen unit in which the appliance is fitted
must satisfy the stability requirements of DIN
68930.
After Installing the Hob
• Maker sure that the power cord is not accessible
through cupboard doors or drawers.
• Make sure that there is adequate flow of fresh air
from outside the cabinetry to the base of the
hob.
• If the hob is installed above a drawer or
cupboard space, a thermal protection barrier
must be installed below the base of the hob.
• The isolating switch must be easily accessible by
the customer.
Before Locating the Fixing Brackets
• The appliance should be placed on a stable,
smooth surface. Do not apply force onto the
buttons protruding from the hob.
Adjusting the Bracket Position
Fix the hob on the work surface by screwing 2
brackets on the bottom of hob(see picture) after
installation. Adjust the bracket position to suit the
particular work top thickness.
WARNING
• Under any circumstances, make sure that the
brackets cannot come into contact with the inner
surfaces of the worktop after installation.
CAUTION
• The hob must be installed by qualified
technicians. We have technicians available for
such service. Never carry out the installation by
yourself.
• The hob must not be installed directly above a
dishwasher, fridge, freezer, washing machine or
clothes dryer, as the humidity may damage the
hob.
• The hob shall be installed so that better heat
radiation can be ensured to enhance its
reliability.
Bekijk gratis de handleiding van LG BCI607T4BG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | BCI607T4BG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2289 MB |
