Levenhuk Halo NVR50 handleiding
Handleiding
Je bekijkt pagina 6 van 47
6
Target ranging
Use this function to estimate the distance to a target.
1. Select the Ranging option in the menu, switch the ranging option on.
2. Press the Left button to enter the Ballistic Data Computer / Crosshair
adjustment mode.
3. Select the target height reference value in upper left corner.
4. Select the distance to the target: 100 yards (91m), 200 yards (182m), 300
yards (274m), 400 yards (365m), or 500 yards (457m).
The distance is measured from the bottom to the top distance reference marks.
!
Note that the reference value is expressed in meters (1.7 meters target
in height as shown in the gure), while the distance to the target is
expressed in yards.
Reticle adjustment. Calibration
1. Select the Cross adjustment (Reticle adjustment) option.
2. Icon is selected by default. Press the Le and Right buttons to adjust the
reticle coordinate values (x, y).
3. Align the crosshair center with the center of the target.
4. Press and hold the Le button to complete and to save the settings or
5. select icon to reset the reticle coordinates to the initial values (X:0.0, Y:0.0),
adjust the recitle coordinates, and then press and hold the Le button to
complete and to save the settings.
6. Select icon to conrm the changes of the reticle settings and to exit the
reticle adgustment mode.
Zeroing
1. Aim at the target and adjust X and Y so that the center of the reticle (aiming
point) aligns with the center of the target.
2. Shoot and adjust the position of the reticle again according to the actual point
of impact until you hit the expected hit point.
3. Press and hold the Left button to comlete and to save the settings.
Reticle type adjustment
To change the reticle shape and color, select the Reticle type option in the menu,
then you can select 1 of 5 types of reticles and 1 of 5 colors of reticles (white,
black, red, green or blue).
• Select icon to select the reticle shape, press the Le and Right battons to
choose, then press the power button to conrm.
• Select icon to select the reticle color, press the Le and Right battons to
choose, then press the power button to conrm.
• Select icon to conrm the changes of the reticle settings and to exit the
reticle adgustment mode.
Reticle types:
Copying les
You can transfer les from the device to your smartphone, tablet, or PC directly
(connect the device to your computer with a USB cable).
Bekijk gratis de handleiding van Levenhuk Halo NVR50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Levenhuk |
| Model | Halo NVR50 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4945 MB |
