Levenhuk Halo NVM50 handleiding
Handleiding
Je bekijkt pagina 5 van 47
5
Getting started
Install batteries
Open the battery compartment cover and insert the rechargeable battery
according to the correct polarity marks. Close the cover.
Rechargeable battery charging
Insert it into the battery charger according to the correct polarity symbols.
Connect the battery charger to the AC power supply, using the power cable and
power adapter. Prior to using the rechargeable battery for the first time, charge
it for at least 4 hours.
Installing/removing the memory card
• The device supports memory cards class 10 up to 64GB.
• Insert the microSD card into the slot. Make sure the direction is right. Do not
force the card in.
• Format the microSD card before starting, as it will improve its compatibility
with the device.
• To remove the card from the slot, press the edge of the memory card in gently,
and the card will pop out. Then, remove the card.
!
If the memory card is not installed, a No Card icon will be displayed.
Button panel and device settings
Power button
Button functions: 1) turns the device on and off; 2) confirms the selection;
3) plays/pauses the video in the playback mode.
Press and hold the power button for 3 seconds to turn the device on or off. Turn
the focusing wheel to adjust the focus on the viewed object. Turn the diopter
adjustment ring to make the words and icons on the display clearer.
Up button
Button functions: 1) enters, exits and scrolls the Menu; 2) adjusts the zoom;
3) plays the video forward in the playback mode.
Press and hold the Up button for 3 seconds to enter or exit the Menu. Press the
Up button to adjust the zoom value (1x, 2x, 3x, 4x).
Down button
Button functions: 1) enters and exits the IR-light mode; 2) adjusts the IR-
illumination level; 3) selects the color mode; 4) rewinds the video in the playback
mode.
If the present light is insufficient or it is to be used in the evening, press and hold
the Down button for 3 seconds to turn the IR-light on. The image will change
from color to black and white. Press the Right button to select the brightness
level. The brightness values will be displayed on the screen. Press the Down
button to select a color mode for image display (color, black-and-white,
fluorescent green, phosphorous white). Alternatively, you can select the Color
(Color mode) option in the Menu and then select the required color mode.
Menu options
Icon
Select hide or show the icons on the display.
1. Video recording status
2. Wi-Fi status
3. IR-light status
4. Time
5. Battery status
6. Crosshairs
7. Compass and gyroscope
Bekijk gratis de handleiding van Levenhuk Halo NVM50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Levenhuk |
| Model | Halo NVM50 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5738 MB |
