Lenovo ThinkPad L13 2-in-1 Gen 6 Handleiding (68 Pagina's)

Handleiding

Note: Do not remove the base cover assembly when your computer is connected to ac power. Otherwise,

there might be a risk of short circuits.

For access, do the following:

1. Disable Fast Startup and the built-in battery. See “Before you replace any CRU” on page 34.

2. Turn off the computer and disconnect the computer from ac power and all connected cables.

3. Close the computer display and turn over the computer.

Tool needed: Phillips-head screwdriver

Step 1. Remove the base cover assembly as shown below.

When you loosen screw

a , a gap appears and you can use the gap to lift up the base cover

assembly.

Step 2. Install the base cover assembly as shown below.

Chapter 6. CRU replacement 35

Bekijk gratis de handleiding van Lenovo ThinkPad L13 2-in-1 Gen 6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.