Lenco TTA-180TN handleiding
Handleiding
Je bekijkt pagina 6 van 67
6
3.3 Adjust Gain: In [Gain Adjustment] mode, short press the "ON/OFF"
button once, or repeatedly, to adjust the light's gain to the desired
level. There are 5 gain levels (1, 2, 3, 4, and 5) available for
selection;
3.4 Exit Gain Adjustment Mode: Once the adjustment is complete,
quickly short press the "ON/OFF" button twice to exit [Gain
Adjustment] mode. Alternatively, the mode will exit automatically
after 30 seconds of inactivity.
Note:
- The corresponding light flashing are depending on the gear
number (1 – 5) of gain level, higher the number will be the higher
the sensitivity = more reaction to music beats
- The default gain level of the software is set at gear 3
Mic Gain/Sensitivity Adjustment for Driving Light Effects
Corresponding table:
Gear Mode
Selection
LED Indication
Gain/Sensitivity Level
1
Red LED light up
lowest
2
Blue LED light up
lower
3
(Factory Default)
White LED light up
Medium sensitivity
4
Pink LED light up
higher
5
Green LED light up
highest
4. Low battery
4.1 When the battery voltage drops to low level, all 5 LEDs will flash 5
seconds.
4.2 When the battery voltage drops to the lowest level, all 5 LEDs
Bekijk gratis de handleiding van Lenco TTA-180TN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenco |
| Model | TTA-180TN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6531 MB |