Lelit Anna PL41TEM handleiding
Handleiding
Je bekijkt pagina 13 van 56

Pagina 13
English
Cleaning
The machine must be cleaned at least once a week.
Before starting, remove the plug from the electrical outlet and allow the machine to cool.
Use a soft cloth, preferably microfiber, like the LELIT cloth (code PLA9101 - not included), and moisten
it with plain water. Do not use abrasive detergents and do not immerse the machine in water.
For thorough maintenance, we suggest you use the LELIT brush (code PLA9101 - not included), which will help you
clean the nozzles and the spaces between the gaskets more effectively, removing stains and coffee residues from
even the smallest cracks.
Warm running water can be used to clean the removable parts of the machine. The filters and filterholder should
never be washed in a dishwasher.
There is no need to clean the filters after each use, but make sure that they are not clogged.
However, to ensure the best performance of your machine, it is essential to thoroughly clean the steam wand and
filterholder after each use.
The filterholder should be cleaned to remove the greasy coffee residues that can negatively affect the taste of your
coffee.
Wash the exterior part of the steam wand with a damp cloth and release a little steam to remove any milk residues
from inside the wand, as these could obstruct the steam output, making it more difficult to froth milk properly.
BACKFLUSHING:
It is recommended clean the brewing group at least once a week and / or at least every 100 brewed coffees
The following instructions apply to all types of groups fitted to our coffee machines.
Material needed:
Blind filter (12)
Brush (code PLA9101)
Detergent powder for coffee machine (code PLA9201)
Group cleaning. Follow these steps:
1. Place the blind filter (12) into the filterholder
2. Add 1 single-dose bag of detergent powder (3,5 grams) in the blind filter
3. Insert the filterholder into the brewing group
4. Switch the coffee switch on for about 10 seconds
5. Stop the coffe brewing and wait for 10 seconds
6. Without removing the filterholder, repeat this operation 5 times
7. Remove the filterholder, switch the coffee switch on again and rinse the filterholder under the hot water that
comes out of the group. Turn the switch off
8. Clean the brew group and the brew gasket first with the brush and then with a damp cloth in order to
remove all coffee powder rests
9. Insert the filterholder into the brewing group again and repeat points 4-5-6 without detergent powder
10. Throw away the first coffee you brew
Cleaning of the accessories through immersion. Follow these steps:
1. Place the filters and filterholder in a jug with the filterholder handle upwards
2. Pour 2 single-dose bags of detergent powder in the jug (7 grams)
3. Pour 1 liter of hot water in the jug until the metallic part of the filterholder is completely immerged
4. Wait at least 15 minutes
5. Remove the immerged parts and rinse them with plenty of warm tap water
6. Throw away the first coffee you brew
DESCALING THE MACHINE
The use of the machine creates a natural formation of limescale, over a time period depending on the frequency of
use of the machine and on the hardness of the water.
Limescale deposits can obstruct the tubes and decrease the brewing temperature, altering the quality of the coffee
and reducing the lifetime of your machine.
To avoid the formation of limescale, which can also deposit in the internal circuits, we recommend the use of our
LELIT resin filter (code PLA930M - not included) to soften the water. Please insert the filter in the tank following the
instructions on the packaging. The filter purifies the water from the calcium and magnesium salts which are
deposited to form limescale and affect the taste of your coffee. Remember that the filter loses its effectiveness after
a certain number of gallons treated, so replace it periodically. Instructions for the use and replacement of the filter
are given on the box.
To avoid any possibility of damaging the components of the machine, ADD ONLY NATURAL DESCALING PRODUCTS
INTO THE WATER TANK.
Bekijk gratis de handleiding van Lelit Anna PL41TEM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lelit |
| Model | Anna PL41TEM |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7729 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Hefboom |
| Kleur van het product | Roestvrijstaal |
| Ingebouwd display | Ja |
| Gewicht | 7200 g |

